SDS

PPG83-140 PPG TIMELESS INTERIOR FLAT - ULTRA DEEP BASE
Product name
1.01
Product code
Date of issue
Version
00392819
10 May 2017
Section 9. Physical and chemical properties
Vapor pressure
Relative density
Vapor density
Solubility
1.11
Not available.
3.3 kPa (25 mm Hg) [room temperature]
Soluble in the following materials: cold water.
Evaporation rate
0.05 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: Not applicable. [Product does not sustain combustion.]
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
Boiling point
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
38.266
Density ( lbs / gal )
:
9.26
Volatility
:
68% (v/v), 61.734% (w/w)
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
The product is stable.
Chemical stability
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
When exposed to high temperatures may produce hazardous decomposition products.
Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.
Decomposition products may include the following materials: carbon monoxide, carbon
dioxide, smoke, oxides of nitrogen.
Refer to protective measures listed in sections 7 and 8.
United States
Page: 6/11