Use and Care Manual

PPG Timeless Exterior Paint + Primer
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
PPG Timeless Exterior Paint and Primer is formulated with our most
advanced paint innovation – providing complete one coat hide, cover-
age and durability.* With PPG Timeless UV-Protect Technology, you
get guaranteed one coat coverage in 900+ colors and the best resist-
ance to extreme weather.* The tough finish provides exceptional
resistance to chipping, flaking and cracking and provides a mold,
mildew and algae resistant coating. When you choose PPG Timeless
Paint you can be confident that you’ll complete your project quickly
and that the exterior of your home will stay beautiful and protected.
* Learn more at ppgtimeless.com. One coat coverage only when tint-
ed to colors specified for PPG Timeless Exterior Paints.
Aluminum Siding Ferrous Metal Stucco
Brick Fiber Cement Vinyl Siding*
Concrete Masonry Wood
*Vinyl siding and similar plastic composites should not be painted with
a color darker than the original color. Painting vinyl siding or plastic
composites with a darker color may cause them to warp. Color selec-
tion for use over vinyl siding is limited. For information, call 1-800-441-
9695.
PRODUCT TYPE: 100% Acrylic
SHEEN: Flat, 1-5 @ 60º; 1-5 @ 85º
VOLUME SOLIDS*: 44% +/- 2%
WEIGHT SOLIDS*: 60% +/- 2%
VOC: <50 g/L (0.4 lbs./gal.)
WEIGHT/GALLON*: 11.7 lbs. (5.3 kg) +/- 0.2 lbs. (91 g)
*Product data calculated on product PPG73-110
COVERAGE: Approximately 250 to 300 sq. ft. (23.2 to 27.9 sq. meters)
per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces.
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 30 minutes
To Recoat: 4 hours
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.
CLEANUP: Clean brushes and tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
PPG73-110 Pure White (Base 1)
PPG73-120 Midtone Bae (Base 2)*
PPG73-140 Ultra Deep Base (Base 3)*
*Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
PPG73-110
TIMELESS
®
PPG73-110 Series
Exterior Paint + Primer•
Complete One Coat Hide & Coverage*•
Best Resistance to Extreme Weather*•
UV-Protect Technology•
Excellent Fade Resistance•
Exceptional Resistance to Chipping, Flaking & Cracking•
High Build Formula Hides Minor Imperfections•
Provides a Mold, Mildew & Algae Resistant Coating•
100% Acrylic•
* Learn more at ppgtimeless.com. One coat coverage only when tint-
ed to colors specified for PPG Timeless Exterior Paints.
LIMITATIONS OF USE
FOR EXTERIOR USE ONLY. Apply when air and surface temperatures
are 35ºF (2ºC) and surface temperature is at least 5ºF (3ºC)
above the dew point. For optimum application properties, bring
material to at least 50ºF (10ºC) prior to application. Air and surface
temperature must remain above 35ºF (2ºC) for the next 24 hours.
Avoid painting late in the day when dew and condensation are likely
to form or if rain or snow is expected. Do not apply in direct sunlight.
Not recommended for use on steps or floors. PROTECT FROM
FREEZING.
While this product provides a mildew resistant coating, growth may
still occur if the substrate is not properly prepared prior to painting
and/or if the substrate is consistently exposed to conditions conducive
to mold, mildew, and algae.
PACKAGING
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.
Read Label and Safety Data Sheet prior to use. See other cautions on last page.