SDS

PPG3101V PPG TIMELESS STAIN & SEALANT IN ONE SOLID COLOR - WHITE /
BASE 1
Product name
1
Product code
Date of issue
Version
00387527
18 October 2016
Section 8. Exposure controls/personal protection
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Respiratory protection
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Other skin protection
:
Gloves
butyl rubber polyethylene
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.17
Not available.
Not available.
Soluble in the following materials: cold water.
Characteristic.
Odor
pH
Not available.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: Not applicable. [Product does not sustain combustion.]
Not available.
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Upper: 0%
Decomposition temperature
:
Not available.
Density ( lbs / gal )
:
9.76
United States
Page: 7/13