Use and Care Manual

Architectural Coatings PPG UltraLast Interior Latex Paint + Primer Semi-Gloss
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Backed by 135 years of coatings expertise, PPG UltraLast Interior
Paint + Primer delivers breakthrough stain resistance and exceptional
resistance to color loss and gloss change. Setting a new standard for
super-premium interior paints, PPG UltraLast offers unprecedented
washability - even in low-sheen finishes and deep colors. Proprietary
PPG CLEAN-SURFACE TECHNOLOGY™ is a powerful integration of
automotive and industrial coatings technology that keeps stains,
grime and scuffs at the surface, where all-purpose cleaners can
remove them easily. Interior walls will look clean and fresh until they
are ready for a change of color.
Concrete/Masonry Gypsum Wallboard-Drywall
Concrete Block (CMU) Plaster
Ferrous Metal Wood
PRODUCT TYPE: Acrylic Latex
SHEEN: Semi-Gloss, 50-60 @60º
VOLUME SOLIDS*: 38% +/- 2%
WEIGHT SOLIDS*: 51% +/- 2%
WEIGHT/GALLON*: 10.5 lbs. (4.8 kg) +/- 0.2 lbs. (91 g)
VOC: <50 g/L (0.4 lbs./gal.)
*Product data calculated on product 13-510.
COVERAGE: Approximately 400 sq. ft. (37 sq. meters) per U.S. Gallon
(3.78L) on smooth, nonporous surfaces.
Wet Film Thickness: 4 mils
Wet Microns: 102
Dry Film Thickness: 1.5 mils
Dry Microns: 38
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some col-
ors, drastic color changes, or porous substrates may require more than
one coat to achieve a uniform finish.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 30-60 minutes
To Recoat: 2-4 hours
To Full Cure: 30 days
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement. Wait at least 30 days after painting
before cleaning the surface with a non-abrasive, mild cleanser. Very
deep colors may require longer to fully cure.
CLEANUP: Clean tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
13-510 White & Pastel Base
13-520 Midtone Base*
13-540 Ultra Deep Base*
*Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
13-510
ULTRALAST™ 13-510 Series
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
Features Benefits
Engineered for unmatched washability Longest lasting freshly-painted look
Repels the most difficult stains Stains wash easily away
Exceptional burnish and mar resistance Highly resistant to gloss change and color loss from cleaning and abrasion
Low VOC, <50 g/L Low odor, compliant in all regulated areas
Specifically formulated to resist mildew on the paint film Resists stains and deterioration caused by mildew
PACKAGING
CONFORMANCE STANDARDS
VOC compliant in all regulated areas
Quart (946 mL)
1-Gallon (3.78 L)
5-Gallon (18.9 L)