Use and Care Manual

Architectural Coatings PPG Speedhide Pro EV Zero Interior Enamel Latex Eggshell
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Speedhide Pro EV Zero Interior Enamel Latex Eggshell paint is a
durable, quality interior vinyl acrylic paint designed for new and
repaint applications where speed of application is most important in
both the commercial and multi-family markets. This zero-VOC**, low
odor paint enables a space to be painted while occupied while deliv-
ering the durable product performance required. Speedhide Pro EV
Zero interior paint has good adhesion and application properties on
walls, ceilings and trim surfaces. Speedhide Pro EV Zero is recom-
mended on interior walls, ceilings and trim where an eggshell finish is
desirable.
Concrete/Masonry Gypsum Wallboard-Drywall
Concrete Block (CMU) Plaster
Ferrous Metal Wood
PRODUCT TYPE: Vinyl Acrylic Latex
SHEEN: Eggshell, 4-10 @60º
VOLUME SOLIDS*: 32% +/- 2%
WEIGHT SOLIDS*: 45% +/- 2%
WEIGHT/GALLON*: 10.2 lbs. (4.6 kg) +/- 0.2 lbs. (91 g)
VOC: 0 g/L (0.0 lbs./gal.)**
*Product data calculated on product 12-310XI.
COVERAGE: Approximately 400 sq. ft. (37 sq. meters) per U.S. Gallon
(3.78L) on smooth, nonporous surfaces.
Wet Film Thickness: 4 mils
Wet Microns: 102
Dry Film Thickness: 1.3 mils
Dry Microns: 33
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some col-
ors, drastic color changes, or porous substrates may require more than
one coat to achieve a uniform finish.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 1 hour
To Recoat: 4 hours
To Full Cure: 30 days
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement. Wait at least 30 days after painting
before cleaning the surface with a non-abrasive, mild cleanser. Very
deep colors may require longer to fully cure.
CLEANUP: Clean tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
12-310XI White & Pastel Base
12-320XI Midtone Base*
12-340XI Ultra Deep Base*
*Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
12-310XI
SPEEDHIDE
®
PRO EV ZERO 12-310XI Series
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
Features Benefits
Zero VOC** Meets the most stringent VOC regulations nationwide
Good hiding power and coverage Saves money; less material required
Good washability Durable finish/withstands repeated cleaning
Excellent uniformity Prevents sheen variation
Easy to apply Better finished appearance
Easy Soap & Water Clean-Up No solvent disposal issues
Can help earn LEED v4 EQ Low-Emitting Materials Credit Contributes to sustainable design
**Colorants added to this base paint may increase VOC level significantly depending on color choice. However, PPG Futurity and
PPG HS colorants (96-xxxXI, 96-xxx, 96-xxxx, 96-xxxxx), even if used at maximum tint load in any color, contributes less than 8 g/L of
VOC to the final tinted product.
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.
PACKAGING
CONFORMANCE STANDARDS
VOC compliant in all regulated areas
MPI approved in category #44 and #44 X-Green