Use and Care Manual

PPG Ultra-Hide Zero Interior Latex Paint
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Ultra-Hide Zero Interior Latex Paint is a durable, professional quality
interior vinyl acrylic paint designed for new and repaint applications
where speed of application is most important. Ideal for maintenance
and facility management, this zero VOC*, low odor paint enables a
space to be painted while occupied while delivering the durability that
is required. Ultra-Hide Zero Interior Latex Flat Paint has great touch-
up and good hide and application properties on walls, ceilings and trim
surfaces. Ultra-Hide Zero Interior Latex Paint is recommended for pre-
viously painted or primed interior wallboard, masonry, plaster, wood,
or metal.
*Colorants added to this base paint may increase VOC level significantly depending on
color choices.
Concrete Gypsum Wallboard-Drywall
Concrete/Masonry Block Plaster
Ferrous Metal Wood
PRODUCT TYPE: Vinyl Acrylic Latex
SHEEN: Flat, 0-5 @ 60º & 85º
VOLUME SOLIDS**: 31% +/- 2%
WEIGHT SOLIDS**: 48% +/- 2%
VOC: 0 g/L (0.0 lbs./gal.)*
WEIGHT/GALLON**: 10.9 lbs. (4.9 kg) +/- 0.2 lbs. (91 g)
**
Product data calculated on product 1300-0100
COVERAGE: Apply at 350-400 sq. ft. (32.5-37.2 sq. meters) per U.S.
gallon (3.78 Liters) on primed, smooth, nonporous surfaces.
Wet Film Thickness: 4.0-4.6 mils
Wet Microns: 102-117
Dry Film Thickness: 1.3-1.5 mils
Dry Microns: 33-38
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 1 hour
To Recoat: 4 hours
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.
CLEANUP: Clean brushes and tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
1300-0100 Pure White (Base 1)
1300-0300 Midtone Base (Base 2)**
1300-0500 Ultra Deep Base (Base 3)**
**Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
1300-0100
ULTRA-HIDE
®
Zero 1300-0100 Series
Dead Flat - Easily Hides Wall Imperfections
Great Touch Up - Reduces Labor
Good Hide & Coverage - Provides Uniform Finish
Ideal for Walls & Ceilings
Water-Based formula - Easy soap and water cleanup
Greenguard Certified - Meets Strict Chemical Emission Limits
Zero VOC* - Meets the Most Stringent Environmental Regulations
LIMITATIONS OF USE
FOR INTERIOR USE ONLY. Apply when air, product and surface tem-
peratures are between 50ºF (10ºC) and 90ºF (32ºC). USE WITH ADE-
QUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read
all label and Safety Data Sheet (SDS) information prior to use. SDS are
available through our website or by calling 1-800-441-9695.
Not recommended for use on floors or in high humidity areas.
PROTECT FROM FREEZING.
PACKAGING
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
*
Colorants added to this base paint may increase VOC level significantly depending on color choices.