Intelligent Stick™ Intelligent StickTM Pro220 Pro 220 Series Rev. A.
Intelligent Stick™ Table of Contents 1. Introduction to Intelligent StickTM Pro 220............................................................................... 1 2. Main Features Overview ………..……….....................……...…...……………………………...… 1 3. Hardware Specification ………………………………………….………….……………………..… 1 4. Block Diagram ........................................................................................................................... 2 5. Absolute Maximum Ratings ................................
Intelligent Stick™ Revision History Revision A.0 A.1 y y Date 09/08 ‘06 01/03 ‘07 History New Creation Add Support Windows Vista And Update Capacity Remark Important!! Please make sure the driver matches the part number on your pen drive before you download. Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP/Windows Vista. y The advertised memory capacity of this device represents unformatted capacity.
Intelligent Stick™ 1. Introduction to Intelligent StickTM Pro 220 The Intelligent Stick Pro 220 is a PQI patented technology. It combines characteristics of a flash card and a USB flash drive. It does not need a card reader to read from or write to thus making it the perfect storage medium for all types of digital devices. PQI's Intelligent Stick consumes minimum power and its minute dimensions makes it easy to store.
Intelligent Stick™ 4. Block Diagram Program ROM 8051 Micro Controller Program RAM Flash Control Logic DMA Data / Flash Memory Address Bus EDC/ ECC USB2.0 USB 2.0 USB1.1 USB2.0 or 1.1 Port Host DATA RAM Interface CLK PWR_GOOD PWR_RST PLL, REG 5. Absolute Maximum Ratings Symbol Tstorage Ta Parameter Storage Temperature Ambient Operating Temperature Min Max Unit -20 75 ℃ 0 65 ℃ Vcc3 3.3V Supply Voltage -0.3 3.6 V Vcc18 1.8V Supply Voltage -0.3 2 V Vin3.3 3.
Intelligent Stick™ 6. DC Characteristics Symbol Parameter Min. Max. Unit VIH_TTL TTL Input High Voltage 2 Vcc3+0.3 V VIL_TTL TTL Input Low Voltage -0.3 0.8 V VOH_TTL TTL Output High Voltage VOL_TTL TTL Output Low Voltage IOH_TTL TTL Output High Current IOL_TTL TTL Output Low Current 0.9 X Vcc3 Notes V 0.45 -4 V mA 4 mA USB Input High Voltage for VIH_USB 2.0 V Low-/full-speed USB Input Low Voltage for 0.
Intelligent Stick™ 7. Recommended Operating Conditions Symbol Vcc33 Vin Vcc25 Parameter Power Supply Voltage Input Voltage Internal Power Support Min. Typical Max. Units 3.0 3.3 3.3 V 0 Vcc Vcc+0.3 V 2.25 2.5 2.75 v 8. Pin Assignments Pin No. Pin Name Function 1 VCC 2 USB D- USB differential signal 3 USB D+ The pairs are used to transmit Data/Address/Command 4 VSS USB power input Ground 1 Rev. A.
Intelligent Stick™ 9. Physical Specifications 9.1 Dimensions: 9.1.1 Height: 43mm 9.1.2 Width: 18mm 9.1.3 Depth: 2.8mm 9.1.4 Weight: 2.7g ± 0.5g 9.2 Outline of top view Rev. A.