USB Flash Drive Mr. Flash U172 BB55 Series Rev. A.
USB Flash Drive Table of Contents 1. Introduction to Mr. Flash ………................................................................................................ 1 2. Main Features Overview …………..……….....................……...……………………………..…… 1 3. Hardware Specification ………………………………………..….………….……………………… 1 3.1 USB Interface …………………………………………………….........….…………………………… 1 3.2 NAND Flash Interface ………………………………………………..............………..………………. 1 3.3 OS Support ……………………………………………………………........………….……………… 1 3.
USB Flash Drive Revision History Revision A.0 Date 09/11 ‘06 History Remark New Creation Important!! Please make sure the driver matches the part number on your pen drive before you download. Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP The advertised memory capacity of this device represents unformatted capacity.
USB Flash Drive 1. Introduction to U172 The U172 gives you portability and security to offer you a peace of mind. Compatible with USB 2.0 / 1.1 specifications with low power consumption and data protection. 2. Main Features Overview ♦ ♦ ♦ ♦ ♦ ♦ Compact metallic casing with futuristic design Mobile USB flash drive, USB 2.
USB Flash Drive 4. Block Diagram Program ROM 8051 Micro Controller Program RAM Flash Control Logic Flash Min Max Unit -20 75 ℃ 0 65 ℃ DMA Data / Memory Address Bus EDC/ ECC USB2.0 USB 2.0 USB1.1 Host USB2.0 or 1.1 Port DATA RAM Interface PLL, REG CLK PWR_GOOD PWR_RST 5. Absolute Maximum Ratings Symbol Tstorage Ta Parameter Storage Temperature Ambient Operating Temperature Vcc3 3.3V Supply Voltage -0.3 3.6 V Vcc18 1.8V Supply Voltage -0.3 2 V Vin3.3 3.
USB Flash Drive 6. DC Characteristics Symbol Parameter VDD Supply voltage for VCC3 or VCC3A Regulator output voltage for VCC or VDD18 VCCA Min. Typical Max. Units 3.0 3.3 3.6 V 1.62 1.8 1.98 V 0.8 V VIL Input Low Voltage -0.5 VIH Input High Voltage 2.0 VOL Output Low Voltage (IOL=4mA) VOH Output High Voltage (IOH=4mA) CIN Input pin capacitance IDD Supply current ISUS Suspend current (D+1.5KΩ) V 0.4 2.4 V V 10 50 pF mA 300 uA 7.
USB Flash Drive 9. Physical Specifications 9.1 Dimensions: 9.1.1 Height: 58.8.mm 9.1.2 Width: 17.6mm 9.1.3 Depth: 9.3mm 9.1.4 Weight: 9g ± 1g 9.3 9.2 Outline of top view Rev. A.