Operating Manual
1.3 Displays temperature data for Sensor X84A:
Tx* represents the send signal strength, Rx represents the receive signal strength,
Fx represents the fail count. The digit “*” of TX* represents the antenna (port),
represenng the antenna reading the sensor signals.
• When “Read Fail” is displayed: Failed to read the temperature.
• When “No Seng” is displayed: Sensor ID was not set.
• When “Disable” is displayed: This Sensor has been disabled.
• When “----” is displayed: Sll Inializing, hasn’t received temperature read.
• When “ANT Disable” is displayed: The antenna for reading the sensor has been
disabled.
1.4 Advanced Sensor Status Display
Page 28