User Manual

4
Once the charging has completed, turn on the unit by pressing the power button.
On the first time basis, it is advisable to calibrate the stylus calibration by going to:
Start -> Settings -> Control Panel -> Stylus.
Follow the cursor and tap on it. After this, Time, Date and Time Zone configuration screen will
be required to be set as the default time, date and time zone differ from places to places.
Time, Date and Time Zone configuration
Go to Start -> Settings -> Control Panel -> Date/Time.
“Time, Date and Time Zone configuration” application will be shown as below.
First Time Use
Carefully press and briefly hold
stylus on the centre of the target.
Repeat as the target moves around
the screen. Press ESC key to cancel