3D Digital Video Camera User’s Manual
Table of Contents About this manual............................................................ iv Copyright .......................................................................... iv Precautions ....................................................................... v Before You Start .............................................................viii Copyright information ...................................................viii 1 Introducing the camcorder........................ 1 1.
2.6 2.7 2.8 2.9 3 ii Connecting to TV (HDMI Cable)......................... 12 Connecting to PC (USB Cable) ............................ 13 Changing modes ................................................... 13 Before you start .................................................... 13 2.9.1 Managing the Setup mode ...................... 14 2.9.2 Language .................................................. 15 2.9.3 Date / Time .............................................. 15 2.9.4 Format ....................
3.6.3 3.6.4 3.6.5 3.7 Color .......................................................... 33 Date Stamp ............................................... 34 Continuous Shooting............................... 34 Playback Photos ................................................... 35 3.7.1 Playback Photos ....................................... 35 3.8 Deleting Photos .................................................... 37 Specifications ..................................................................
Preface Congratulations on your purchase of this advanced camcorder. Ensure that you read this manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up to date. However, no guarantee is made regarding the accuracy of the contents.
Precautions General precautions Do not use or store the product in dusty, dirty, or sandy areas, as its components may be damaged. Do not store the product in a hot environment. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. Do not store the product in cold areas. When the product warms up to its normal temperature, moisture can form inside, which may damage the electronic circuits.
Notes on the LCD Screen Be very careful to ensure the fluid contained in the LCD screen does not escape if the screen becomes cracked or damaged. If this occurs, follow these steps: If the fluids make contact with skin, wipe it with a clean cloth then rinse with a large amount of water. If the fluid makes contact with eyes, wash eyes with clean water for at least 15 minutes and go to the hospital as soon as possible.
Remove the battery if the camera is not going to be used for a long time. If the battery is left unused for more than 3 months, you need to charge the battery before use.
Before You Start Take some test shots before performing a formal recording. Before taking pictures with this DV camera in any important occasion (such as a wedding ceremony or an overseas trip), do test the DV camera beforehand to ensure that it functions properly. Any additional loss caused by the malfunction of this product (such as costs of photography or any loss of benefit generated by the photography) is not the responsibility of the manufacturer and no compensation will be given for it.
1 Introducing the camcorder Read this section to learn about the features and functions of the camcorder. This chapter also covers system requirements, package contents, and descriptions of the hardware components. 1.1 System requirements 1.1.
1.3 Unpacking the camcorder The following items should be present in the package. If any item is missing or appears damaged, contact your dealer immediately.
1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls of this camcorder. 1.4.1 Front view Charger LED 3D LCD Panel LED Indicator 1.4.
1.4.3 Right view HDMI, USB Out 1.4.
1.4.5 Back view Microphone 1.4.6 Lens Operating the camcorder To turn on the power, rotate the LCD panel (90°).
See the table below for a description of each button’s function. Name Button Function Mode Button Press to switch to different modes: Video, Camera, or Setup. Playback Button Press to playback recorded videos or photos. 3D Button Press to toggle between 3D and 2D modes. Menu / Delete Button Navigation Button 6 In Video/Camera mode, press to access the Video/Camera menu. In Video/Camera menu mode, press to return to Video/Camera mode.
Name Button Function Video/Camera mode to adjust the EV settings. In Video mode, press the middle button to start recording a video. Press it again to stop recording. In Camera mode, press the middle button to take a picture. In 2D Video or Camera mode, press right to zoom in or press left to zoom out when shooting videos or photos. In Video playback mode, press up/down to adjust the volume level. In photo playback mode, press down to view 4 thumbnail images.
2 Getting started Read this section to learn how to start using the camcorder. This section covers basic functions such as switching on, inserting the battery and memory card, and configuring preliminary settings. See later chapters for advanced functions. 2.1 Inserting an SD card An SD card can be installed in the camcorder to provide additional storage space for still images, video clips, or other files. 1. Open the SD card door as shown in the illustration. 2. Insert the memory card.
3. Close the SD card door. 2.2 Inserting the battery This camcorder is designed to use a rechargeable Li-ion battery. Only use the battery supplied by the manufacturer or your dealer. Note: Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder and possibly start a fire. 1. Remove the battery cover as shown in the illustration. .
2. Insert the battery. Make sure that the + and – symbols on the battery line up with the + and – symbols on your camcorder. 3. Close the battery cover. Note: Make sure that the battery cover is tightly closed to ensure proper operation.
2.3 Charging the battery You can charge the battery with the charging unit provided. Follow the below steps to charge your battery. 1. Insert the Li-ion battery into the charging bay. Connect one end of the power cord to the charging unit and then plug the other end to the wall outlet as shown. 2. The orange LED will light up for proper charging. 3. After full charge, the LED turns to green. 4. Actual charging time depends on current battery capacity and charging conditions.
2.4 Turning on/ off the camcorder Rotate the LCD panel (90°) to turn the camcorder on/off. 2.5 Connecting to TV (AV Cable) To view pictures or videos on a TV, connect the camcorder to a TV using the supplied AV cable as shown. 2.6 Connecting to TV (HDMI Cable) You can also connect the camcorder to a TV using the HDMI cable (Optional). Note: For 3D video playback, you need to use a 3D HDTV.
2.7 Connecting to PC (USB Cable) Connect the camcorder to a computer with the USB cable provided as shown. 2.8 Changing modes The camcorder can operate in three modes, Video, Camera, and Setup. Press the Mode Button to toggle between Video, Camera, and Setup modes. You can also press the 3D Button to toggle between the 2D and the 3D modes.
2.9.1 Managing the Setup mode To select a menu in the Setup mode, please do the following: 1. Press the Mode Button to switch to the Setup mode screen. 2. Use the Navigation Button to scroll through the options/pages until the desired menu is highlighted. Please see below for the available options. 3. Press the middle Navigation Button to open the menu. The following options are available in the Setup mode: 1 5 2 6 3 4 7 8 1. Language 5. Auto power off 2. Date/Time 6. Frequency 3.
2.9.2 Language The Language menu allows you to select the language displayed. To select the language, please do the following: 1. Use the left/right Navigation Button to select the desired language. 2. Press the middle Navigation Button to confirm. 2.9.3 Date / Time The Date / Time menu allows you to adjust the date and time. To adjust the Date / Time, please do the following: 1. Use the left/right Navigation Button to select the field to be adjusted. 2.
2.9.4 Format The Format menu allows you to format your memory card or the internal memory when no memory card is inserted. To format your memory card or internal memory, please do the following: 1. Use the left/right Navigation Button to select √. 2. Press the middle Navigation Button to confirm. Warning: Formatting will delete everything on the media. 2.9.5 Default The Default menu allows you to reset the camcorder to factory defaults. To reset, please do the following: 1.
2.9.6 Auto Power Off The Auto Power Off menu allows you to set an idle time after which the camcorder automatically sets to sleep mode to save power. To adjust the Auto Power Off, please do the following: 1. 2. 2.9.7 Use the left/right Navigation Button to select: X: Disable the Auto Power Off function. 1 min.: Auto Power Off after 1 minute. 5 min.: Auto Power Off after 5 minutes. Press the middle Navigation Button to confirm.
2.9.8 TV Standard The TV Standard menu allows you to select the TV standard of the recorded videos. To adjust the TV Standard, please do the following: 1. Use the left/right Navigation Button to select NTSC or PAL. 2. Press the middle Navigation Button to confirm. 2.9.9 Beep The Beep menu allows you to turn the operation sound off or on. To adjust the Beep, please do the following: 1. 2. 18 Use the left/right Navigation Button to select: X: Turn the operation sound off.
3 Using the Camcorder 3.1 Recording Videos To record a movie, do the following: 1. Rotate the LCD to turn on the camcorder. 2. Press the middle Navigation Button to start recording the video. To adjust the video, you may: 3. Press the 3D Button to switch to 3D or 2D mode. 3D mode allows you to record videos with 3D effects; 2D mode allows you to take regular 2D videos. Press the down Navigation Button to decrease the EV settings. Press the up Navigation Button to increase the EV settings.
The Video Recording Screen 1 6 # 1 2 3 4 5 6 20 Icon 2 7 3 8 5 4 9 10 11 Description Indicates that the camcorder is in Video mode. Indicates the current White Balance mode. Indicates the amount of zoom being used. Indicates the recording time. Indicates the number of the current video. Indicates the amount of battery power left.
# Icon Description 7 Indicates the current resolution. 8 Indicates the current Color mode being used. Indicates the current exposure value. 9 10 11 Indicates the memory card is inserted. The icon disappears when no memory card is inserted; files are stored in internal memory. Indicates the remaining space for your memory card/internal memory.
3.2 Video Mode Menu To select a menu in the Video mode, please do the following: 1. Press the Menu Button to open the Video mode menu screen. 2. Use the Navigation Button to scroll through the options until the desired menu is highlighted. Please see below for the available options. 3. Press the middle Navigation Button to open the menu. 4. Press the Menu Button to go back to Video mode. 1 2 3 The following options are available in the Video mode menu: 1. White balance 2. Resolution 3.
3.2.1 White Balance The White Balance menu allows you to set the white balance when capturing images under specific lighting conditions. To set the White Balance, please do the following: 1. 2. Use the left/right Navigation Button to select the desired option: Auto: Select this option to let the camcorder set the white balance automatically. Sunny: Select this option for daylight filming. Cloudy: Select this option for filming in cloudy days.
3.2.2 Resolution The Resolution menu allows you to set the resolution before you capture an image or a video. The higher the resolution, the more memory space is required. To select the resolution, please do the following: 1. 2. Use the left/right Navigation Button to select the desired option: VGA: Select this option for 640 x 480 resolution (3D only). WVGA: Select this option for 848 x 480 resolution. 720P: Select this option for 1280 x 720 resolution (2D only).
3.3 Playback Videos 3.3.1 Playback Videos To playback videos, please do the following: 1. Make sure you are in the Video mode. Press the Mode Button to switch to the Video mode if not. 2. Press the 3D Button to switch to 3D or 2D mode to view the 3D or 2D videos you recorded. 3. Press the Playback Button to enter the Video playback screen. 4. Press the left/right Navigation Button to browse the recorded videos. 5. Press the middle Navigation Button to playback the video.
The Video Playback Screen 1 2 3 # 1 2 3 4 26 Icon 4 Description Indicates that the camcorder is in Playback mode. Indicates the number of the current video. Indicates the amount of battery power left. Indicates the total recorded time.
3.4 Deleting Videos To delete a video, please do the following: 1. Press the Playback Button to switch to the Video playback mode. 2. Press the left /right Navigation Button to switch to the file you want to delete. 3. Press the Delete Button to open the delete video screen. 4. Use the left/right Navigation Button to select 5. Press the middle Navigation Button to confirm. .
3.5 Shooting Photos To shoot a photo, do the following: 1. Flip open the LCD to turn on the camcorder. 2. Press the Mode Button to switch to Camera mode. 3. Press the middle Navigation Button to capture a photo. To adjust the camera, you may: 28 Press the 3D Button to switch to 3D or 2D mode. 3D mode allows you to record photos with 3D effects; 2D mode allows you to take regular 2D photos. Press the down Navigation Button to decrease the EV settings.
The Camera Screen 1 5 # 1 2 3 4 5 Icon 2 6 3 7 4 8 9 10 Description Indicates that the camcorder is in Camera mode. Indicates the current White Balance mode. Indicates the amount of zoom being used. Indicates the number of the current photo. Indicates the amount of battery power left.
# Icon Description 6 Indicates the current resolution. 7 Indicates the current Effect mode being used. Indicates the current exposure value. 8 9 10 30 Indicates the memory card is inserted. The icon disappears when no memory card is inserted; files are stored in internal memory. Indicates the remaining space for your memory card/internal memory.
3.6 Camera Mode Menu To select a menu in the Camera mode, please do the following: 1. Press the Menu Button to open the Camera mode menu screen. 2. Use the Navigation Button to scroll through the options until the desired menu is highlighted. Please see below for the available options. 3. Press the middle Navigation Button to open the menu. 4. Press the Menu Button to go back to the Camera mode. 1 2 3 4 5 The following options are available in the Camera mode menu: 1. White balance 4.
3.6.1 White Balance The White Balance menu allows you to adjust the white balance when capturing images under specific lighting conditions. To set the White Balance, please do the following: 1. 2. 32 Use the left/right Navigation Button to select the desired option: Auto: Select this option to let the camcorder set the white balance automatically. Sunny: Select this option for daylight filming. Cloudy: Select this option for filming in cloudy days.
3.6.2 Resolution The Resolution menu allows you to set the resolution before you capture an image or a video. The higher the resolution, the more memory space is required. To select the resolution, please do the following: 1. 2. Use the left/right Navigation Button to select the desired option: 5M: Select this option for 2592 x 1944 resolution. 8M: Select this option for 3200x2400 resolution. Press the middle Navigation Button to confirm. 3.6.
3.6.4 Date Stamp Date Stamp allows you to imprint a date/time stamp on the photo. To turn on the Date Stamp, please do the following: 1. Use the left/right Navigation Button to select √. 2. Press the middle Navigation Button to confirm. 3.6.5 Continuous Shooting Continuous Shooting allows you to shoot photos continuously while the Shutter Button is held down. To set the Continuous Shooting, please do the following: 1. Use the left/right Navigation Button to select √. 2.
3.7 Playback Photos 3.7.1 Playback Photos To playback photos, please do the following: 1. Make sure you are in the Camera mode. Press the Mode Button to switch to the Camera mode if not. 2. Press the 3D Button to switch to 3D or 2D mode to view the 3D or 2D photos you recorded. 3. Press the Playback Button to enter the Photo playback screen. 4. Press the left/right Navigation Button to browse the recorded photos. Use the down Navigation Button to view 4 thumbnail images.
The Photo Playback Screen 1 2 3 # 1 2 3 36 Icon Description Indicates that the camcorder is in Playback mode. Indicates the number of the current photo. Indicates the amount of battery power left.
3.8 Deleting Photos To delete a photo, please do the following: 1. Make sure you are in the Photo playback mode. When in Camera mode, press the Playback Button to switch to the Photo playback mode. 2. Press the left /right Navigation Button to switch to the file you want to delete. 3. Press the Delete Button to open the delete photo screen. 4. Use the left/right Navigation Button to select 5. Press the middle Navigation Button to confirm. .
Appendix Specifications General Imaging sensor 1/4” 5M CMOS Sensor x 2 Active pixels 5.0 Megapixel Storage media Internal: Built-in 128MB Flash Memory SD Card: (Up to SDHC 32GB Class6) Color effects Color/Sepia/Black & White Lens F2.8, f=3.83mm Focus range Approx. 1.0m~infinity Still image Formats: JPEG (EXIF 2.
General Movie clips H.264 (AVI) 3D Movie: VGA 640x480, WVGA 848 x 480 2D Movie: 720p30fps, WVGA30fps Zoom 3D: NA 2D: 4X Digital Zoom LCD monitor 3.2”color LCD monitor (320 x 480 pixels) White balance Auto/Sunny/Cloudy/Tungsten/ Fluorescent EV -2.0 EV~+2.0 EV compensation PC interface USB 2.0 (high speed) AV out format NTSC/PAL/HDMI Shutter Electronic shutter 1/30-1/2000 Auto power off Off, 1 min., 5 min. Power supply KLIC 7001 Li-ion battery Dimensions (W x H x D) Approx. 59 x 112 x 18.
Troubleshooting Problem Cannot turn on the camcorder. The camcorder suddenly turns off. The captured image is not stored in memory. The camcorder turns off while taking a picture. The image is out of focus. 40 Possible Cause The battery is not inserted correctly. The battery have no power. The auto power off function is enabled. The camcorder is running out of battery power. Before the image is saved the power has been cut off. The camera is running out of battery power.
Problem A black screen appears on the screen. Memory card cannot be used. All buttons are inactive. Possible Cause The EV setting may be set too low. The memory card is protected. The memory card contains non-DCF images taken by other camcorders. Short circuit occurred when connecting the camera with other devices. Solution Adjust the EV setting on the camcorder. Unlock the memory card. Format the memory card. Before formatting the card, ensure you back up the files.
