Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste. Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Table of Contents About this manual........................................................ iv Copyright ..................................................................... iv Precautions ................................................................... v Before You Start .......................................................... vii Copyright information................................................. vii 1 Introducing the camcorder .......................1 1.1 1.2 1.3 1.4 2 System requirements...
2.7 2.8 2.9 3 ii Connecting to PC (USB Cable).......................... 16 Changing modes................................................ 16 Before you start ................................................. 16 2.9.1 Setting the Date and Time..................... 17 2.9.2 Setting the Language............................. 17 2.9.3 Setting the Beep..................................... 18 Using the Camcorder ..............................19 3.1 3.2 Recording Videos.........................................
3.8.2 3.8.3 3.8.4 3.8.5 3.8.6 Resolution.............................................. 38 Effect ...................................................... 38 Night Mode ........................................... 39 Selftimer................................................. 39 Quality ................................................... 40 3.9 Using the AF Lock ............................................ 40 3.10 Using Manual Focus......................................... 41 3.11 Playback Photos .............
Preface Congratulations on your purchase of this advanced camcorder. Ensure that you read this manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up to date. However, no guarantee is made regarding the accuracy of the contents.
Precautions General precautions Do not use or store the product in dusty, dirty, or sandy areas, as its components may be damaged. Do not store the product in a hot environment. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. Do not store the product in cold areas. When the product warms up to its normal temperature, moisture can form inside, which may damage the electronic circuits.
Notes on the LCD Screen Be very careful to ensure the fluid contained in the LCD screen does not escape if the screen becomes cracked or damaged. If this occurs, follow these steps: If the fluids make contact with skin, wipe it with a clean cloth then rinse with a large amount of water. If the fluid makes contact with eyes, wash eyes with clean water for at least 15 minutes and go to the hospital as soon as possible.
Remove the battery if the camera is not going to be used for a long time. If the battery is left unused for more than 3 months, you need to charge the battery before use. Before You Start Take some test shots before performing a formal recording. Before taking pictures with this DV camera in any important occasion (such as a wedding ceremony or an overseas trip), do test the DV camera beforehand to ensure that it functions properly.
1 Introducing the camcorder Read this section to learn about the features and functions of the camcorder. This chapter also covers system requirements, package contents, and descriptions of the hardware components. 1.1 System requirements The camcorder requires a PC with the following specifications: Windows® 7 / Vista / XP operating system Intel® / AMD Dual-Core CPU or higher At least 1 GB of RAM or higher At least DirectX 9 video card, DirectX 10 is recommended Standard USB 1.
1.3 Unpacking the camcorder The following items should be present in the package. If any item is missing or appears damaged, contact your dealer immediately.
1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls of this camcorder. 1.4.1 Front view Lens LED 1.4.
1.4.3 Bottom view Memory Card Compartment : 1.4.
1.4.5 Left view Battery Cover Latch Battery Compartment Hand Strap 1.4.
1.4.7 Operating the camcorder To turn on the power, press the Power button for one second or open the LCD panel 90°. Rotate the LCD panel can be rotated in both directions so you can view pictures and movies.
See the table below for a description of each button’s function. Name Button Function Power Button Press and hold to turn the camcorder on or off. Shutter Button Press to take a picture. Zoom Button Slide to the right/left to zoom in /zoom out when shooting videos or photos. Navigation Button In Video and Camera mode: 1. Press up/ down to adjust the exposure settings. 2. Press the Navigation button to enable AF Lock. The AF Lock icon appears on the screen. 3.
screen when enabled. Press right again to enable the macro function. A icon appears on the LCD screen when enabled. In Camera Playback mode: 1. Press right and left to view the stored images. 2. When the image is zoomed in, direction keys appear on the LCD screen. You may press the Navigation button to move the image. (up/down left/right). 3. Press the Navigation button up to enter the Thumbnail mode. 4.
screen mode. In Video Playback mode: 1. Press right and left to view the stored video clips and press the middle Navigation button to play/ stop the video clips. 2. In Playing mode, press right to fast-forward a video clip and move left to rewind a video clip. 3. Press the Navigation button up to enter the Thumbnail mode. 4. In the Thumbnail mode, press up, down, left, right to select a desired video clip, and then press the middle Navigation button to show the video clip.
Record Button Press to start recording a video. Press it again to stop recording. Mode Dial Use to switch to Video, Camera, or SET mode. Menu Button Press to display the menu for the current mode. Display Button Press once to turn off all OSD icons and press again to display all OSD icons. LED Light Button In Video and Camera modes, press to turn on/off the LED light. Playback Button In Video and Camera modes, press to enter the playback mode.
2 Getting started Read this section to learn how to start using the camcorder. This section covers basic functions such as switching on, inserting the battery and memory cards, and configuring preliminary settings. See later chapters for advanced functions. 2.1 Inserting an SD card An SD card can be installed in the camcorder to provide additional storage space for still images, video clips, or other files. 1. Open the LCD screen cover and open the memory card compartment cover. 2.
3. Close the SD card cover. 2.2 Inserting the battery This camcorder is designed to use a rechargeable Li-ion battery. Only use the batteries supplied or similar batteries recommended by the manufacturer or your dealer. Note: Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder and possibly start a fire. 1. . 12 Push the battery cover latch to open the battery cover as shown in the illustration.
2. Insert the battery. Make sure that the + and – symbols on the battery line up with the + and – symbols on your camcorder. 3. Close the battery cover.
2.3 Charging the battery You can charge the battery with the charging unit provided. Follow the below steps to charge your battery. 1. Insert the Li-ion battery into the charging bay. Connect one end of the power cord to the charging unit and then plug the other end to the wall outlet as shown. 2. The orange LED will light up for proper charging. 3. After full charge, the LED turns to green. 4. Actual charging time depends on current battery capacity and charging conditions.
2.5 Connecting to TV (AV Cable) To view pictures or videos on a TV, connect the camcorder to a TV using the supplied AV cable as shown. 2.6 Connecting to TV (HDMI Cable) You can also connect the camcorder to a TV using the HDMI cable (Optional).
2.7 Connecting to PC (USB Cable) Connect the camcorder to a computer with the USB cable provided as shown. 2.8 Changing modes The camcorder can operate in three modes: Video, Camera, and SET. Move the mode dial to toggle to different modes. 2.9 Before you start Before you start using the camcorder, some basic settings such as date and time, languages and beep function need to be configured.
2.9.1 Setting the Date and Time To adjust the Date / Time, please do the following: 1. Turn on the camcorder, and move the mode dial to SET. 2. Use the left/right Navigation Button to highlight Date / Time and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 3. Use the left/right Navigation Button or tap the screen to select the field to be adjusted. 4. Use the up/down Navigation Button or tap / to adjust the value. 5.
2.9.3 Setting the Beep To adjust the Beep, please do the following: 1. Turn on the camcorder, and move the mode dial to SET. 2. Use the left/right Navigation Button to highlight Beep and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 3. Use the left/right Navigation Button or tap the screen to select: 4. 18 Off: Turn the operation sound off. On: Turn the operation sound on. Press the middle Navigation Button or tap confirm.
3 Using the Camcorder 3.1 Recording Videos To record a movie, do the following: 1. Flip open the LCD to turn on the camcorder and move the mode dial to Video mode. 2. Press the Record Button to start recording the video. To adjust the video, you may: 3. Use the Zoom Button to zoom in and out. Press the LED Light Button to activate or disable the LED light. Press the left Navigation Button to quickly change the White Balance. To stop movie recording, press the Record Button again.
# 1 2 3 4 5 6 7 8 Icon Description Indicates that the camcorder is in Video mode. Tap to zoom in or out the image (only available in MF mode). Indicates the current White Balance mode. Indicates that the Night mode is on. Indicates the current Effect mode being used. Indicates the amount of zoom being used. Indicates that the Manual Focus (MF) is on. Indicates that the Macro is on. Indicates that the Auto Focus (AF) is on. Indicates the amount of battery power left. 9 Indicates the current resolution.
3.2 Video Menu To select a menu in the Video mode, please do the following: Make sure you are in the Video mode. Move the mode dial to switch to the Video mode if not. 1. Press the Menu Button to open the Video mode menu screen. 2. Use the Navigation Button to select the desired menu and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. Please see below for the available options. 3. Press the Menu Button or tap 1 2 to exit the menu.
Note: The Quality menu is only appeared on the menu screen if you have inserted a memory card into the device. Please read the following section to learn how to operate each menu. 3.2.1 White Balance The White Balance menu allows you to set the white balance when capturing images under specific lighting conditions. To set the White Balance, please do the following: 1. 2.
3.2.2 Resolution The Resolution menu allows you to set the resolution before you capture an image or a video. The higher the resolution, the more memory space is required. To select the resolution, please do the following: 1. Press the left/right Navigation Button or tap the screen to select 1080P, 720P/60FPS, 720P/30FPS, WVGA, QVGA resolution. 2. Press the middle Navigation Button or tap confirm.
3.2.3 Effect The Effect menu allows you to change the recording effect. To set the Effect, please do the following: 1. 2. 3.2.4 Use the left/right Navigation Button or tap the screen to select the desired option: Natural: Select it for color photography. Black and white: Select it for black and white effect. Sepia: Select it for brown color effect. Press the middle Navigation Button or tap confirm.
3.2.5 Quality The Quality menu allows you to set video qualities. A file in better quality requires more storage space than a file in the normal quality. To set the Quality, please do the following: 1. 2. Use the left/right Navigation Button or tap the screen to select the desired option: High: Select this option for high quality. Normal: Select this option for normal quality. Press the middle Navigation Button or tap confirm. to 3.
3. Use the Zoom Button to manually adjust the focus. Note: To zoom in or out the image, tap the icon on the screen. Then use the Zoom Button to zoom in or out. To toggle back to MF mode, tap the icon. 4. Press the Record Button to record videos. 3.5 Playback Videos 3.5.1 Playing Back Videos To playback videos, please do the following: 1. Make sure you are in the Video mode. Move the mode dial to switch to the Video mode if not. 2. Press the Playback Button to enter the Video playback screen. 3.
The Video Playback Screen 1 2 5 # Icon 3 4 6 7 8 Description 1 Indicates that the camcorder is in Playback mode. 2 Indicates that the file is protected. 3 Indicates the recording time. 4 Indicates the current video/ total videos. 5 Tap to view the previous video.
# 6 7 8 28 Icon Description Tap to display the video playback menu. Tap to view the recorded videos as thumbnails. Press to view the next video.
3.6 Video Playback Menu To select a menu in the Video playback mode, please do the following: 1. Make sure you are in the video playback mode. When in Video mode, press the Playback Button to switch to the video playback mode. 2. Press the Menu Button or tap playback mode menu screen. 3. Use the Navigation Button to select the desired menu and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 4.
Please read the following section to learn how to operate each menu. 3.6.1 Delete One The Delete One menu allows you to delete files individually. To delete a file, please do the following: 1. Use the left/right Navigation Button to select Delete One and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap / to select the desired file. 3. Press the middle Navigation Button or tap to delete.
3.6.2 Delete All The Delete All menu allows you to delete all the recorded files. To delete all files, please do the following: 1. Use the left/right Navigation Button to select Delete All and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap the screen to select X or . 3. Press the middle Navigation Button or tap to confirm.
3.6.3 Protect The Protect menu allows you to protect files from being deleted. To protect a file, please do the following: 1. Use the left/right Navigation Button to select Protect and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap / to select the desired file. 3. Press the middle Navigation Button or tap to protect.
3.6.4 Autoplay The Autoplay menu allows you to playback the recorded files automatically. To start Autoplay, please do the following: 1. Use the left/right Navigation Button to select Autoplay and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. It begins the video playback. If you want to stop the Autoplay, press the middle Navigation Button or tap .
3.7 Shooting Photos To shoot a photo, do the following: 1. Flip open the LCD to turn on the camcorder. 2. Move the mode dial to switch to Camera mode. 3. Press the Shutter Button to capture a photo. To adjust the camera, you may: Use the Zoom Button to zoom in and out. Press the LED Light Button to activate or disable the LED light. Press the left Navigation Button to quickly change the White Balance.
# 1 2 3 4 Icon Description Indicates that the camcorder is in Camera mode. Tap to zoom in or out the image (only available in MF mode). Indicates the current White Balance mode. Indicates that the Night mode is on. 10 Indicates the current Effect mode being used. Indicates the amount of zoom being used. Indicates the remaining number of photos. Indicates that the Manual Focus (MF) is on. Indicates that the Macro is on. Indicates that the Auto Focus (AF) is on. Indicates the amount of battery power left.
3.8 Camera Mode Menu To select a menu in the Camera mode, please do the following: 1. Make sure you are in the Camera mode. Move the mode dial to switch to the Camera mode if not. 2. Press the Menu Button to open the Camera mode menu screen. 3. Use the Navigation Button to select the desired menu and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 4. Press the Menu Button or tap 1 2 5 6 to exit the menu.
Note: The Quality menu is only appeared on the menu screen if you have inserted a memory card into the device. Please read the following section to learn how to operate each menu. 3.8.1 White Balance The White Balance menu allows you to adjust the white balance when capturing images under specific lighting conditions. To set the White Balance, please do the following: 1. 2.
3.8.2 Resolution The Resolution menu allows you to set the resolution before you capture an image or a video. The higher the resolution, the more memory space is required. To select the resolution, please do the following: 1. 2. Use the left/right Navigation Button or tap the screen to select the desired option: 3M: Select this option for 2048 x 1536 resolution. 5M: Select this option for 2592 x 1944 resolution. 16M: Select this option for maximum resolution.
2. Sepia: Select this option for brown color effect. Press the middle Navigation Button or tap confirm. 3.8.4 to Night Mode For better results shooting at night, the Night mode menu allows you to turn the Night mode on or off. To set the Night mode, please do the following: 1. Use the left/right Navigation Button or tap the screen to select Off or On. 2. Press the middle Navigation Button or tap to confirm. 3.8.
2. 10 sec: Select this option for 10-second delay. Press the middle Navigation Button or tap confirm. 3.8.6 to Quality The Quality menu allows you to set photo qualities. A file in better quality requires more storage space than a file in the normal quality. To set the Quality, please do the following: 1. 2. Use the left/right Navigation Button or tap the screen to select: High: Select this option for high quality. Normal: Select this option for normal quality.
3.10 Using Manual Focus The Manual Focus (MF) function is used to manually set the focus. 1. 2. 3. Press the right Navigation button to enable MF function. The MF icon appears on the screen. Aim the device on your desired subject. Use the Zoom Button to manually adjust the focus. Note: To zoom in or out the image, tap the icon on the screen. Then use the Zoom Button to zoom in or out. To toggle back to MF mode, tap the icon. 4. Press the Shutter Button to capture an image. 3.11 Playback Photos 3.11.
The Photo Playback Screen 1 2 4 # Icon 3 5 6 7 Description 1 Indicates that the camcorder is in Playback mode. 2 Indicates that the file is protected. 3 Indicates the current photo/total photos. 4 Tap to view the previous photo. 5 6 7 42 Tap to display the photo playback menu. Tap to view the recorded photos as thumbnails. Press to view the next photo.
3.12 Photo Playback Menu To select a menu in the Photo playback mode, please do the following: 1. Make sure you are in the Photo playback mode. When in Camera mode, press the Playback Button to switch to the Photo playback mode. 2. Press the Menu Button or tap playback mode menu screen. 3. Use the Navigation Button to select the desired menu and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. Please see below for the available options. 4.
Read the following section to learn how to operate each menu. 3.12.1 Delete One The Delete One menu allows you to delete files individually. To delete a file, please do the following: 1. Use the left/right Navigation Button to select Delete One and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap / to select the desired file. 3. Press the middle Navigation Button or tap to delete.
3.12.2 Delete All The Delete All menu allows you to delete all the recorded files. To delete all files, please do the following: 1. Use the left/right Navigation Button to select Delete All and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap the screen to select X or 3. . Press the middle Navigation Button or tap to confirm.
3.12.3 Protect The Protect menu allows you to protect files from being deleted. To protect a file, please do the following: 1. Use the left/right Navigation Button to select Protect and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap / to select the desired file. 3. Press the middle Navigation Button or tap 46 to protect.
3.12.4 Autoplay The Autoplay menu allows you to playback the recorded files automatically. To start Autoplay, please do the following: 1. Use the left/right Navigation Button to select Autoplay and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. It begins the photo playback. If you want to stop the Autoplay, press the middle Navigation Button.
3.13 System Menu The system menu is used to configure miscellaneous camcorder function. 1. Move the mode dial to SET. 2. Use the Navigation Button to select the desired menu and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. Please see below for the available options. The following options are available in the Set mode: 1 5 2 3 4 6 7 8 1. Date / Time 5. Format 2. Beep 6. Default 3. Auto Power Off 7. Language 4.
Please read the following section to learn how to operate each menu. 3.13.1 Date / Time See section 2.9.1 “Setting the Date and Time” on page 17. 3.13.2 Beep See section 2.9.3 “Setting the Beep” on page 18. 3.13.3 Auto Power Off The Auto Power Off menu allows you to set an idle time after which the camcorder automatically sets to sleep mode to save power. To adjust the Auto Power Off, please do the following: 1.
3.13.4 TV Standard The TV Standard menu allows you to select the TV standard of the recorded videos. To adjust the TV Standard, please do the following: 1. Use the left/right Navigation Button to highlight TV standard and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap the screen to select NTSC or PAL. 3. Press the middle Navigation Button or tap to confirm. 3.13.
3. Press the middle Navigation Button or tap confirm. to Warning: Formatting will delete everything on the media. 3.13.6 Default The Default menu allows you to reset the camcorder to factory defaults. To reset, please do the following: 1. Use the left/right Navigation Button to highlight Default and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap the screen to select X or √. 3.
3.13.8 Frequency The Frequency menu allows you to set the refresh rate of the camcorder. Increasing the refresh rate decreases flickering, thereby reducing eyestrain. To set the refresh rate, please do the following: 1. Use the left/right Navigation Button to highlight Frequency and press the middle Navigation Button to open the menu. You can also tap the screen to open the selected menu. 2. Use the left/right Navigation Button or tap the screen to select 60Hz or 50Hz. 3.
Appendix Specifications General Imaging sensor 1/3.2”CMOS 5.0 Megapixel Sensor Active pixels 5.0 Megapixel Storage media Internal: Built-in 128MB Flash Memory SD Card: (Up to SDHC 32GB Class6) Color effects Natural/B&W/Sepia Lens 5X Optical zoom lens Focus range Wide: 45cm ~ infinity Tele: 20cm ~ infinity Macro: 5cm ~ 100 cm Still image Formats: JPEG (EXIF 2.2), DCF, Resolution: 3M, 5M, 16M (Firmware Interpolation) Movie clips H.
General Zoom Movie: 5X Optical Zoom, 4X Digital Zoom (except 1080p and QVGA) Camera: 5X Optical Zoom, 4X Digital Zoom TFT monitor 3.0” TFT (960 x 240 pixels) (16:9) LED light Effective range: < 1M Mode: On/Off White balance Auto/Sunny/Cloudy/Tungsten/ Fluorescent EV compensation -2.0 EV~+2.0 EV Self-timer Off, 5, 10 seconds PC interface USB 2.0 (high speed) AV out format NTSC/PAL/HDMI Shutter Electronic shutter Video: 1/15 - 1/2000 sec. Still: 2 sec. ~ 1/4000 sec.
Troubleshooting Problem Possible Cause Solution Cannot turn on the camcorder. The battery is not inserted correctly. The battery have no power. The auto power off function is enabled. The camcorder is running out of battery power. Before the image is saved the power has been cut off. Insert the battery correctly. Charge the battery. The camcorder suddenly turns off. The captured image is not stored in memory. The camcorder turns off when capturing image using the selftimer.
Problem Possible Cause Solution A black screen appears on the screen. Memory card cannot be used. The EV setting may be set too high. The memory card is protected. The memory card contains non-DCF images taken by other camcorders. All buttons are inactive. Short circuit occurred when connecting the camera with other devices. Adjust the EV setting on the camcorder. Unlock the memory card. Format the memory card. Before formatting the card, ensure you back up the files.