Product Card

ManualsBrandsPramac Manuals50kVA to 250kVA Three Phase Stationary Diesel Generators148 kVA Three Phase Perkins Diesel Generator, PFL

GSW-150P

Main Features

Frequency Hz 50

Voltage V 400

Power factor cos ϕ 0.8

Phase and connection 3

Power Rating

Standby power LTP kVA 148.00

Standby power LTP kW 118.40

Prime power PRP kVA 137.84

Prime power PRP kW 110.27

Ratings definition (According to standard ISO8528 1:2005)

PRP - Prime Power:

It is defined as being the maximum power which a generating set is capable of delivering continuously

whilst supplying a variable electrical load when operated for an unlimited number of hours per year under

the agreed operating conditions with the maintenance intervals and procedures being carried out as

prescribed by the manufacturer. The permissible average power output over 24 h of operation shall not

exceed 70 % of the prime power.

LTP - Limited-Time running Power:

It is defined as the maximum power available, under the agreed operating conditions, for which the

generating set is capable of delivering for up to 500 h of operation per year (whose no more than 300 for

continuative use) with the maintenance intervals and procedures being carried out as prescribed by the

manufacturers. No overload capability is available.

Summary of content (8 pages)

PAGE 1
GSW-150P Main Features Frequency Voltage Power factor Hz 50 V 400 cos ϕ 0.8 Phase and connection 3 Power Rating Standby power LTP Standby power LTP kVA 148.00 kW 118.40 Prime power PRP kVA 137.84 Prime power PRP kW 110.
PAGE 2
Engine specifications Engine manufacturer Perkins Model 1106A-70TG1 [50Hz] Exhaust emission level Non Emission Certified Engine cooling system Water Nr. of cylinder and disposition Displacement 6 in line cm³ Aspiration 7000 Turbocharged Speed governor Mechanical Prime gross power PRP kW 123.7 Maximum gross power LTP kW 136.9 l 14.9 % 0.
PAGE 3
Alternator Specifications Alternator Mecc Alte Model ECP34-1L Voltage Frequency Power factor V 400 Hz 50 cos ϕ 0.8 Type Brushless Poles 4 Voltage regulation system Electronic Standard AVR DSR Voltage tolerance % 1 Efficiency @ 75% load % 93.4 Class IP protection H 23 Mechanical structure Robust mechanical structure which permits easy access to the connections and components during routine maintenance check-ups. Voltage regulator Voltage regulation with DSR.
PAGE 4
Genset equipment BASE FRAME MADE OF WELDED STEEL PROFILE, COMPLETE WITH: • Anti-vibration mountings properly sized • Welded or Screwed support legs.
PAGE 5
Dimensional data Length (L) mm 3000 Width (W) mm 1150 Height (H) mm 1760 Kg 2280 l 360 Fuel consumption @ 75% PRP l/h 22.72 Fuel consumption @ 100% PRP l/h 29.89 Running time @ 75% PRP h 15.85 Running time @ 100% PRP h 12.04 Guaranteed noise level (LWA) dB(A) 97 Noise pressure level @ 7 mt dB(A) 68 m³/min 20.75 °C 576 Ah 140 MAX current A 213.
PAGE 6
ACP - Automatic control panel Mounted on the genset, complete with digital control unit AC03 for monitoring, control and protection of the generating set, protected through door with lockable handle DIGITAL INSTRUMENTATION (through AC-03) • Generating set voltage (3 phases) • Mains voltage • Generating set frequency • Generating set current (3 phases) • Battery voltage • Power (kVA - kW - kVAr) • Power factor Cos φ • Hours-counter • Engine speed r.p.m.
PAGE 7
Supplements: Only Available when order : ENGINE SUPPLEMENTS PHS - Coolant Pre-Heating System - available for models: ACP
PAGE 8
Accessories Items available as accessory equipment LTS - LOAD TRANSFER SWITCH - Accessories ACP Load Transfer Switch panel complete with: • Two layers motorized change-over switch 4pole made by means of two switch disconnectors mechanically interlocked. • Emergency stop button The Load Transfer Switch (LTS) panel operates the power supply changeover between the generator and the Mains in backup applications, guarantying the feeding to the load within a short period of time.