Pramac-GSW460V-Product-Card

ACP - Automatic control panel
Mounted on the genset, complete with digital control unit AC03 for monitoring, control
and protection of the generating set, protected through door with lockable handle
DIGITAL INSTRUMENTATION (through AC-03)
• Generating set voltage (3 phases)
• Mains voltage
• Generating set frequency
• Generating set current (3 phases)
• Battery voltage
• Power (kVA - kW - kVAr)
• Power factor Cos φ
• Hours-counter
• Engine speed r.p.m.
• Fuel level (%)
• Engine temperature (depending on model)
COMMANDS AND OTHERS
• Four operation modes: OFF - Manual starting - Automatic starting - Automatic test
• Pushbutton for forcing Mains contactor or Genset contactor
• Push-buttons: start/stop, fault reset, up/down/page/enter selection
• Remote starting availability
• DC system disconnection switch
• Acoustic alarm
• Automatic battery charger
• RS232 Communication port
• Settable PASSWORD for protection level
PROTECTIONS WITH ALARM
• Engine protections: low fuel level, low oil pressure, high engine temperature
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage
PROTECTIONS WITH SHUTDOWN
• Engine protections: low fuel level, low oil pressure, high engine temperature
• Genset protection: under/over voltage, overload, under/over battery voltage, battery
charger failure
• Circuit breaker protection: III poles
• Earth Fault included in the control unit
OTHERS PROTECTIONS
• Emergency stop button
• Panel protected through door with lockable handle
OUT PUT PANEL ACP
Predisposed for remote control optional: RCG
External Terminal Board (ETB) Standard