MonitorTm Help Manual Part V Analyzing Data The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Analyzing Data 5 Analyzing Data 5.1 Convert Log Function Accessing: 5.1.1 General convert log function Prior to analyzing data locally in GBSLite convert log function 65 , logs must be converted using the 1. The user must select the Input Folder Selection using the Browse button. The log files in the Input Folder will be listed. The user must select the log files to convert using check box next to the filename.
62 MonitorTm Help Manual 2. A unique Output Folder is proposed automatically. The user can modify the Output Folder location and name. *Please note that the Output Folder most always be different then the Input Folder. 3. The column header check box can be used to select all log files. 4. If required, Full Flight Data Mode option is used for troubleshooting and full flight data analysis. 5. Click the Start button to begin conversion of selected files 6.
Analyzing Data 5.1.3 Q400 convert log function For the Q400 application, the program converts only zip files that regroups the complete set of data files per sequence as listed in the examples below: Set of 7 files – Full Flight and EMU data (Phase 2 with propeller monitoring): 53b22546-01of07-fast-q400_cds-*.dtu 53B22546-02of07-FAST-SYS-*.dtu 53b22546-03of07-fast-q400_foqa-*.dtu 53b22546-04of07-fast-q400_emu-*.dtu 53b22546-05of07-fast-q400_eec_1-*.dtu 53b22546-06of07-fast-q400_eec_2-*.
64 MonitorTm Help Manual 53C26DC8-01of05-FAST-SYS-*.dtu 53c26dc8-02of05-fast-aw139_foqa-*.dtu 53c26dc8-03of05-fast-aw139_eec_1-*.dtu 53c26dc8-04of05-fast-aw139_eec_2-*.dtu 53c26dc8-05of05-fast-etm_aw139-*.dtu Set of 2 files – Full Flight: 53C26DC8-01of02-FAST-SYS-*.dtu 53c26dc8-02of02-fast-aw139_foqa-*.dtu Any incomplete AW139 zip file can only be converted in Full Flight Data Mode for troubleshooting analysis. 5.1.
Analyzing Data 65 The Full Flight data files (*G1000_FFD*) can be converted in Full Flight Data Mode to analyze full flight data in GBSLite. 5.1.7 EPEC Convert Log function For the EPECS application, the program converts DTU* files in Full Flight Data Mode for analysis. Note* :This function is in development 5.2 View Data in GBSLite Function Accessing: Opens Live Data 34 recordings and Converted Log Data by selecting the desired folder.
66 MonitorTm Help Manual The user must select the folder where the data has been converted. This can be under Liverdata, Logdata or any other location. The data will be displayed in GBSLite The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Part VI Monitor TM Auto-Update The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
68 MonitorTm Help Manual 6 Monitor TM Auto-Update 6.1 Monitor TM Auto-Update Accessing: If an update exists, the program will indicate that an update is available and will need to follow the instructions If no update exists, the program will indicate that your program is up to date. The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Part VII Additional Information The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
70 MonitorTm Help Manual 7 Additional Information 7.1 Changing MonitorTm preferences Accessing: The Preferences function is available to customize the retrieve log files settings Tag Data Transmitted: When checked, the files retrieved by the program will be tagged as transmitted - It is the user's responsibility to send the data to the Web via the Sync to Webserver Function 58 . When unchecked, the files retrieved will be transmitted to the Web via GSM at next available transmission.
Additional Information 7.2 Printing Accessing: Print and Print Preview can be used whenever a function is being performed Print Setup allows the user to change the printing options such as orientation and paper size The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
72 MonitorTm Help Manual 7.3 Troubleshooting 7.3.1 View Session Log Function Accessing: All actions performed while using MonitorTM are recorded automatically in a session log file for troubleshooting purposes. Session logs can be displayed by filtering the 4 different categories available and can be printed under File Menu/Print. The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Additional Information 7.3.2 View Saved Monitor Status Function Accessing: View previously saved Monitor Status function 25 sessions Please refer to the Monitor Status Function 25 section for a description of the possible status messages and recommended actions The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
74 7.3.3 MonitorTm Help Manual Communication Troubleshooting Please follow the steps listed below to troubleshoot problems you may have while communicating with the Monitor Cycle Monitor Aircraft Power / Monitor power Ensure lights are seen on the monitor Perform Communication Settings Function (Auto-Detection 36 ) Message: FAST Successfully Connected o Retry the original function. If problem persists, contact cfirst@pwc.
Additional Information Please select a different directory Directory is empty. Please select a different directory System error. Missing GBSlite configuration files. Program will terminate A GBSlite program is already running 7.3.5 75 View Data in GBSLite Function 65 GBSlite is installed without MonitorTm. Install MonitorTm. Refer to Program Installation 11 Tried to start GBSlite program while already running.
76 MonitorTm Help Manual 3. Depending on your operating system, double-click dpinst32.exe for 32-bit version of Windows or dpinst64.exe for 64-bit version of Windows. Note: If you are using 32-bit operating system, dpinst64.exe cannot be opened. 4. Follow the onscreen instructions. Select the “Finish” button to complete the driver installation. 7.5 DCTU USB GSE Cable Driver Installation Driver installation is done after inserting the USB cable into your PC’s USB port. 1.
Additional Information 77 3. Depending on your operating system, please follow the below instructions For Windows 7 , the OS will automatically search for the RNDIS driver and will display the following message: For windows 10 there is special instruction For Windows 8 and above : - Go to Device Manager - Find the RNDIS/Ethernet Gadget under "Other Devices" The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
78 MonitorTm Help Manual - Once here Right click on the RNDIS/ ETHERNET Gadget and select Update Driver The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Additional Information - Choose "Browse my computer for driver software" - Select "Let me pick from a list of device drivers on my computer" and click next. The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
80 MonitorTm Help Manual - Once prompt select "Network Adapters" - In the Select Network Adapter window, select Microsoft Corporation The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Additional Information 81 - Select Remote NDIS compatible Device and click next Windows 10 has identified the device as a COM port, under Device manager right click on the comport (example: COM3) The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
82 MonitorTm Help Manual Click on update driver Click the Browse button and navigate to the location where the RNDIS.inf and rndis.cat files are from “Driveletter:\GBS-PWC\bin\Monitor\STARTUP\Driver\DCTU The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.
Additional Information 4. Driver is now installed and ready to be use . The export control classification with respect to this document is ECL: NSR, P-ECCN: 9E991.