Manual

Model 6040 Dry IR Drying System Instruction Manual
Fire Safety
.
CAUTION!
• Jams or stoppages in the transport may cause a FIRE HAZARD.
• NEVER operate the system unless an operator is present at all times.
• NEVER operate the system without a FIRE EXTINGUISHER in the immediate area.
• REMOVE all paper from under heater module IMMEDIATELY if the transport stops
or jams. Even though the lamps are turned off, RESIDUAL HEAT may still ignite
paper.
High Temperatures
WARNING!
• Parts of the heater may exceed 500°F (260°C). Contact with the lamps, aluminum
reflectors, or metal parts near the lamps may cause severe BURNS.
• NEVER place hands under the heating elements when it is operating or hot.
• ALWAYS allow heating element to cool at least 15 minutes before touching the
lamps or adjacent parts.
• ALWAYS wear soft, clean, oil-free flannel or plastic gloves when handling quartz
lamps.
Labels
CAUTION – INTERNATIONAL
Position
This label is installed on the front side of the housing.
Identification
The CAUTION label is a yellow label indicating a potentially hazardous situation that could
result in injury. The international “exclamation point” legend is used on the 6040 to indicate that
caution is required when operating or servicing the product due to high temperatures and high
voltage.
HIGH VOLTAGE WARNING – INTERNATIONAL
Position
This label is installed on the removable front panel of the housing.
Removing this panel allows access to the power and control
circuits within the housing.
Identification
3