Amplifier Owner's Manual

INPUTS

There are two sets of RCA jacks on the front end of your amplifier.

The RCA cables from your source unit go in the set labeled

INPUTS. If your source unit doesn’t have RCA outputs, then add a

set of RCA plugs (available at your dealer) to your front or rear set

of speaker leads (see drawing below). Plug them into the input

jacks, and push in the -12dB input attenuation switch.

ADVANCED INSTRUMENTATION INPUT

The Advanced Instrumentation Input has been incorporated from

the legendary

Precision Power

2500F1

. This circuit completely

isolates the chassis ground from the audio circuit of the amplifier

and reduces noise radiated into your signal cables by up to 40dB.

This is equivalent to a noise reduction of approximately one hundred

times what the noise level would be without this circuitry. It provides

all the benefits of a true balanced line without the need of any

special cables (see diagram below). This type of input works with

any conventional RCA cables.

(+) Positive

(-) Negative

LEFT input

(+) Positive

(-) Ne

ative

RIGHT inpu

eject

VOLUME

BASS

TREBLE

RIGHT

LEFT

BALANCE

TRACK

REVERSE

FOWARD

876

PPI

MAR KET

ING DPT

Trk 1

SOURCE Headunit