How to Guide

Ref.
No
1
2
3
4
5
6
7
8
9
10
11
12
13
Parts
No
5632GY
5622GY
5629
5542
1262
5631GY
1264
4630GY
5630GY
1243GY
1265GY
4468
4497
Description
Body
Tow Bar
Axle
Wheel
Cotter Pin
Tailgate
3/4“ Flat Washer
Pedestal
Undercarriage Axle Supp.
Clevis
Latch
1/4“ x 2-3/4” Spacer
Spring
Qty
1
1
1
2
2
1
4
1
1
1
1
1
1
Ref.
No
14
15
16
17
18
19
20
21
22
23
24
25
Parts
No
1586
4552
1273
1248
1275
1274
1276
4466
1558
1817
1840
1042
Description
5/16” x 3/4” Truss Hd Bolt
3/8“ x 3/4 Truss Head Bolt
3/8“ Hex Head Nut
5/16“ x 3/4 Hex Head Bolt
5/16“ Hex Head Nut
3/8“ Lock Washer
5/16“ Lock Washer
1/4“ x 3-1/2” Bolt
1/4“ Lock Nut
1/4“ Flat Washer
1/2“ x 1-3/4” Clevis Pin
#14 Hitch Pin Clip
Qty
4
12
12
2
6
12
6
1
1
2
1
1
2.) Attach Undercarriage Axle Support (9) on bottom of
Body (1). Use 3/8” x 3/4” Truss Head Bolts (15), 3/8”
Lock Washers (19), and secure with 3/8” Hex Head
Nuts (16).
Bolt the Pedestal (8) at front of Body with 5/16”
x 3/4” Truss Head Bolts (14) from inside.
On the outside, use 5/16” Lock Washers (20)
and secure with 5/16” Hex Head Nuts (18).
Undercarriage
Axle Support
Pedestal
5/16” Hex
Head Nut
5/16” Lock
Washer
Body
3/8” Hex
Head Nut
3/8” Lock
Washer
3/8” x 3/4” Truss
Head Bolts
5/16” x 3/4” Truss
Head Bolt
3/8” Hex
Head Nut
3/8” Lock
Washer
15 Cu. Ft. Dump Cart
LC-1500A & LC1500GY
ASSEMBLY INSTRUCTIONS
05/05
5679
1.) Insert 1/4” Spacer (12) through Spring (13) and
the hole at bottom of Latch (11). Be sure Spring is
attached to Latch as shown. Push Latch down through
slot in Tow Bar (2) as shown. NOTE: Grab the Latch
Handle from the other side of the Tow Bar and
pull down to align the Spacer with the holes in
the sides of the Tow Bar. Slide 1/4” x 3-1/2” Bolt (21)
through side of Tow Bar, Washer (23), Spacer,
Washer (23), and other side of Tow Bar. Secure with
1/4” Lock Nut (22).
Attach the Clevis (10) to the Tow Bar using
5/16” x 3/4” Hex Head Bolts (17) , 5/16” Lock
Washers (20) and 5/16” Hex Head Nuts (18).
Insert the 1/2” x 1-3/4” Clevis Pin (24)
through the large hole in the Clevis and Tow Bar.
Secure the Clevis Pin by inserting the #14 Hitch
Pin Clip (25) through the small hole on the end.
1/4” x 2-3/4”
Spacer
Spring
Tow Bar
1/4” Flat
Washer
1/4” x 3-1/2”
Hex Head Bolt
1/4” Lock Nut
5/16” x 3/4”
Hex Head Bolts
1/2” x 1-3/4”
Clevis Pin
Clevis
#14 Hitch
Pin Clip
5/16” Lock
Washers
1/4” Flat
Washer
Parts List for the LC-1500A & LC1500GY
Tools Needed For Cart Assembly:
Two - 7/16” Wrenches
Two - 1/2” Wrenches
One - 9/16” Wrench
One - Pair Pliers
One - Large Flat Blade Screw Driver
5/16” Hex
Head Nuts
Latch