How to Guide
3.) Slide the Axle (3) halfway through the Undercarriage
Axle Support. Next, insert the Axle through both holes
in the end of the Tow Bar and on through the other side
of the Undercarriage Axle Support. Connect the Tow
Bar to the Pedestal using the tow bar Latch.
Place a 3/4” Flat Washer (7) over the Axle up against
the Undercarriage Axle Support. Next, place a
Wheel (4) onto the Axle. NOTE: The extended
(longer) side of the Wheel hub goes towards the
Undercarriage Axle Support. Place another
3/4” Flat Washer (7) over the Axle and secure
the Wheel into place by inserting the
Cotter Pin (5) through the hole in the end
the Axle and spreading the legs of the Cotter
Pin outward. Repeat the Wheel attachment
step for the other wheel.
LC-1500A & LC1500GY
ASSEMBLY INSTRUCTIONS Continued
Extended side of wheel
hub towards undercarriage
3/4” Flat
Washer
Cotter Pin
Axle
Tow Bar
Wheel
S
i
A
x
l
t roug
h
l
de e
h
U
nd
er
carri
age
Tow Bar
Latch
Pedestal
3/4” Flat
Washer
CUSTOMER SUPPORT
At Precision Products, Inc., delivering
quality, value and outstanding service is our
goal. However, sometimes parts do become
damaged or lost during transport from our
facilities to the store. If you have any
problems, please do not return this
merchandise to the store. Call us and
we will take care of any problem you
may have with this unit.
When ordering replacement parts, please
have the model number, part description
and part number available.
Send To: Precision Products, Inc.
316 Limit Street
Lincoln, IL 62656
Toll Free (800) 225-5891 Ext. 204
Phone (217) 735-1590
Fax (217) 735-2435
Visit us on the web: www.precisionprodinc.com
LIMITED WARRANTY
This unit is warranted against defects in materials and workmanship to the original purchaser, under normal
use and service for a period of ninety (90) days from the date of sale. During the Warranty Period, we will repair or
replace, at our option, free of charge to the original purchaser, any part of the unit that our examination shows to
be defective in workmanship or materials.
This Warranty does not apply to damage in transit or damage caused by misuse, abuse, neglect, normal wear,
or alterations by unauthorized persons.
OPERATION
MAINTENANCE
TO DUMP - Pull latch toward mower and
Cart Body will tilt back to dump position.
TO RETURN TO PULLING POSITION -
Push down on front edge of Cart Body until
Latch engages and secures to Tow Bar.
Tractor speed should be governed by weight
of load. The heavier the load, the slower the
speed for safe operation.
Grease Wheels at regular intervals, at least
every six months, more frequently if used
regularly.
Check tire pressure at regular intervals.
Proper inflation will prolong life of tire.
1,000 Lbs. Maximum Capacity
Approximate weight (1) Cu. Ft.
DIRT-150# SAND-125# GRAVEL-110#
Max. Speed 4 MPH
WARNING OF DANGER OF IMPROPER USE OF
THIS TRAILER CART. THIS UNIT IS INTENDED
FOR USE ONLY WITH RIDING MOWERS OR
GARDEN TRACTORS. IT IS DEFINITELY NOT
FOR HIGHWAY USE, BEING PULLED AT HIGH
SPEEDS, OR TRANSPORTING PASSENGERS OF
ANY SORT. SUCH USE COULD RESULT IN INJURIES
FOR WHICH WE CANNOT BE HELD RESPONSIBLE.
NOTE: