Product Manual

10 Cu. Ft. Dump Cart
LDT-1002 & LDT1002GY
ASSEMBLY INSTRUCTIONS
05/05
4677
1.) Insert 1/4” Spacer (12) through Spring (14) and
the hole at bottom of Latch (7). Be sure Spring is
attached to Latch as shown. Push Latch down through
slot in Tow Bar (2) as shown. NOTE: Grab the Latch
Handle from the other side of the Tow Bar and
pull down to align the Spacer with the holes in
the sides of the Tow Bar. Slide 1/4” x 3-1/2” Bolt (21)
through side of Tow Bar, Washer (23), Spacer,
Washer (23), and other side of Tow Bar. Secure with
1/4” Lock Nut (22).
Attach the Clevis (6) to the Tow Bar using
5/16” x 3/4” Hex Head Bolts (17) , 5/16” Lock
Washers (20) and 5/16” Hex Head Nuts (18).
Insert the 1/2” x 1-3/4” Clevis Pin (24)
through the large hole in the Clevis and Tow Bar.
Secure the Clevis Pin by inserting the #14 Hitch
Pin Clip (25) through the small hole on the end.
Ref.
No
1
**
2
**
3
**
4
**
5
**
6
**
7
**
8
9
Parts
No
4562B
4562GY
4631B
4631GY
4560B
4560GY
4630B
4630GY
4556B
4556GY
1243P
1243GY
1265P
1265GY
1252
4559
Description
Body (Black)
Body (Gray)
Tow Bar (Black)
Tow Bar (Gray)
Tailgate (Black)
Tailgate (Gray)
Pedestal (Black)
Pedestal (Gray)
Undercarriage (Black)
Undercarriage (Gray)
Clevis (Black)
Clevis (Gray)
Latch (Black)
Latch (Gray)
Axle
Wheel
Qty
1
1
1
1
1
1
1
1
2
Ref.
No
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Parts
No
1262
1264
4468
1586
4497
4552
1273
1248
1275
1274
1276
4466
1558
1817
1840
1042
Description
Cotter Pin
3/4“ Flat Washer
1/4“ x 2-3/4” Spacer
5/16” x 3/4” Truss Hd Bolt
Spring
3/8“ x 3/4” Truss Head Bolt
3/8“ Hex Head Nut
5/16“ x 3/4 Hex Head Bolt
5/16“ Hex Head Nut
3/8“ Lock Washer
5/16“ Lock Washer
1/4“ x 3-1/2” HH Bolt
1/4“ Lock Nut
1/4“ Flat Washer
1/2“ x 1-3/4” Clevis Pin
#14 Hitch Pin Clip
Qty
2
4
1
4
1
8
8
2
6
8
6
1
1
2
1
1
1/4” x 2-3/4”
Spacer
Spring
Tow Bar
1/4” Flat
Washer
1/4” x 3-1/2”
Hex Head Bolt
1/4” Reverse
Lock Nut
5/16” x 3/4”
Hex Head Bolts
1/2” x 1-3/4”
Clevis Pin
Clevis
#14 Hitch
Pin Clip
5/16” Lock
Washers
1/4” Flat
Washer
Parts List for the LDT-1002 & LDT1002GY
Tools Needed For Cart Assembly:
Two - 7/16” Wrenches
Two - 1/2” Wrenches
One - 9/16” Wrench
One - Pair Pliers
One - Large Flat Blade Screw Driver
5/16” Hex
Head Nuts
Latch
2.) Attach Undercarriage Axle Support (5) on bottom of
Body (1). Use 3/8” x 3/4” Truss Head Bolts (15),
3/8” Lock Washers (19), and secure with 3/8” Hex
Head Nuts (16).
Bolt the Pedestal (4) at front of Body with
5/16” x 3/4” Truss Head Bolts (13) from inside.
On the outside, use 5/16” Lock Washers (20)
and secure with 5/16” Hex Head Nuts (18).
Undercarriage
Axle Support
Pedestal
5/16” Hex
Head Nut
5/16” Lock
Washer
Body
3/8” Hex
Head Nut
3/8” Lock
Washer
3/8” x 3/4” Truss
Head Bolts
5/16” x 3/4” Truss
Head Bolt
3/8” Hex
Head Nut
3/8” Lock
Washer
**Painted parts have
two part numbers
due to the two
available colors
for this model.