User's Manual

• Battery Low-LED

It is used to indicate that the battery is below 2.4 Volts. It keeps on until

new battery is installed or the battery is total used up. It is flashing only

while the keyboard is not

in sleep mode.

2.2 Operating modes of the Bluetooth keyboard

• Sleep-Mode

After 15 minutes of no keyboard input, the Bluetooth keyboard will automatically enter into

sleep mode to preserve battery power.

• Wake up-Mode

To wake the Bluetooth keyboard up, press any key of the keypad (not

the L and R button of

touchpad or the touchpad itself!).

• Reconnect-Mode

After reactivation the keyboard reconnects automatically with the Bluetooth dongle.

Depending on environmental conditions for the radio transmission it takes less than a

second or up to several minutes to reconnect. In the meantime, the Reconnection-LED is

blinking (cp. for that 2.1).

CAUTION:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

The users manual or instruction manual for an intentional or unintentional radiator

shall caution the user that changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.