User's Manual

ManualsBrandsPrecision Squared Technology ManualsComputers & AccessoriesBluetooth Keyboard

Operation Manual

1. Installation

1.1 System Requirements

Determine that your PC, notebook, tablet, „Handheld“ or similar is on the hardware side

already Bluetooth-enabled. In this connection this keyboard is then compatible to all systems

supporting the Bluetooth HID-profile correctly.

1.2 Preliminaries

Ensure that the accompanying Bluetooth driver software, which belongs to your used

Bluetooth component (integrated Bluetooth module respectively external Bluetooth dongle

receiver) is or was installed correctly on your PC. Please refer to the manual of the

accompanying Bluetooth component manufacturer.

For already embedded Bluetooth module

• If you computer (PC, notebook, tablet, „handheld“ or similar) was provided by manufacturer

with an integrated Bluetooth module, please use the included and preloaded Bluetooth

driver software. You do not need to install other Bluetooth driver software.

For later installed, external Bluetooth dongle receiver

• If your PC is running Windows XP (SP2) and Vista and the IC of your Bluetooth dongle

receiver is from manufacturer CSR, please use the included and preloaded Microsoft

Bluetooth driver software.

You do not need to install other Bluetooth driver software. If you do not like to use the

Microsoft Bluetooth driver software for any reason, you can install optionally Bluetooth

driver software Toshiba or BlueSoleil (from software manufacturer IVT).

• If your PC is running Windows 98 (SE), ME or 2000 and the IC of your Bluetooth dongle

receiver is from manufacturer CSR, please first install the Bluetooth driver software

Toshiba or BlueSoleil (IVT).

• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2)

and Vista and the IC of your

Bluetooth dongle receiver is from manufacturer ISSC (Integrated System Solution Corp.),

please first install the Bluetooth driver software BlueSoleil (IVT).

Summary of content (6 pages)

PAGE 1
Operation Manual 1. Installation 1.1 System Requirements Determine that your PC, notebook, tablet, „Handheld“ or similar is on the hardware side already Bluetooth-enabled. In this connection this keyboard is then compatible to all systems supporting the Bluetooth HID-profile correctly. 1.
PAGE 2
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your Bluetooth dongle receiver is from manufacturer Broadcomm, please first install the Bluetooth driver software WIDCOMM. Advice: Most of Bluetooth keyboards can not operate under BIOS or DOS environment due to the Bluetooth dongle operated in the HCI (Host Controller Interface) mode only.
PAGE 3
Connect ÆBluetooth Human Interface Device Service Then you should be able to find a message Connected in status bar. Now you can use this Bluetooth keyboard to input the data into your computer. Advise: Once the pairing procedure has been Fi carried out successfully, the computer respectively the Bluetooth keyboard can be turned on and off without repeating the pairing procedure. They will connect automatically again.
PAGE 4
1.3.2 Keyboard installation under Bluetooth driver software WIDCOMM Instructions below are based on WIDCOMM software version 1.4.2 running on Windows XP. Follow the instructions which come with your particular Bluetooth adapter (dongle). • Left-click the Bluetooth icon in the system tray of PC. Fi 8 • Opens a menu window of WIDCOMM software. • After opening the menu turn the sliding switch back side of keyboard to ON position and afterwards press 1× the Pairing button.
PAGE 5
• Confirm the appearing request with YES. • After the Bluetooth keyboard is paired with your computer, you will get this green indicator icon. Now you can use this Bluetooth keyboard to input the data into your computer. Fi 15 Advice: Once the pairing procedure has been carried out successfully, the computer respectively the Bluetooth keyboard can be turned on and off without repeating the pairing procedure. They will connect automatically again. Fi 16 2.
PAGE 6
• Battery Low-LED It is used to indicate that the battery is below 2.4 Volts. It keeps on until Fi 19 new battery is installed or the battery is total used up. It is flashing only while the keyboard is not in sleep mode. 2.2 Operating modes of the Bluetooth keyboard • Sleep-Mode After 15 minutes of no keyboard input, the Bluetooth keyboard will automatically enter into sleep mode to preserve battery power.