User's Manual

6
OPERATION
Please always pair the monitor and camera during the 1
st
operation, operation details
please refer below step.
The monitor will automatically turn on when the vehicle is in reverse gear.
There are 5 control buttons available for users to have their controls:
Power button
Press t
h
e POWER button to supply power to the monitor. When the monitor image is on,
the blue LED will be lit. If there is power to the monitor, but the monitor image is OFF,
the blue LED will blink on and off. When the monitor power is off, no picture can appear
on the screen and the blue LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below: Picture SPEC, Picture
Direction, Pair, Product Information.
Repeat pressi
ng the
Menu button to enter into “Picture SPEC” then select Brightness,
contrast or colourof the picture.
Always press the button or button to select the proper function icons and adjust
settings within the control selected. Press the button to select last icon / increase the
value and press the button to select next icon / decrease the value.
Menu button
Guideline button
Power button