APB220 Wireless Rear View Mirror Backup System User Manual v1.
Thank You Thank you for purchasing the 2.4” Rearview Mirror Vehicle Back-Up Camera with Bluetooth® HandsFree Speakerphone System. This system was designed to give additional convenience when driving or operating your vehicle. The systems allows you to view the surrounding behind your car while doing a reversing maneuver and offers the driver a hands-free solution while on the phone. All parts needed to install and operate the system are included in this package.
Contents • • SPECIFICATIONS PRIOR TO INSTALLATION • WARRANTY / LIABILITIES • PACKAGE CONTENT • INSTALLATIONS • OPERATIONS • BUTTON FUNCTIONS AND OPERATION • LED INDICATION • TESTING AND TROUBLESHOOTING • CUSTOMER SERVICE / CONTACT US • FCC / ICC 2
Specifications Prior To Installation - 2.4” Color TFT LCD Monitor Read all the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. - 2.4GHz Wireless Technology - Image sensor: CMOS, 640x480 pixel - Bluetooth® Spec.: v2.
Use of the Rearview Mirror Vehicle Back-Up Camera with • Bluetooth® Hands-Free System is not a substitute for safe, proper and legal driving. • Never back up while looking only at the screen. • Never depend on the Rearview Mirror Vehicle Back-Up Camera with Bluetooth® Hands-Free Speakerphone System entirely when backing up. The image on the screen is different from actual conditions. Objects viewed in the rear view monitor differ from actual distance because a wide-angle lens is used.
• Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. • This product will only provide images of items that are within the field of view of the camera. Thus, it is imperative that the camera should be kept clean and unobstructed, and should mounted so that its field of view includes the entire area behind your vehicle. • Distracted driving is dangerous.
DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, IS MADE AS TO THE REARVIEW MIRROR BACKUP CAMERA. EXCEPT AS EXPRESSLY SET FORTH HEREIN, PRECISION AND/OR ITS AFFILIATES EXPRESSLY DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The Rearview Mirror Backup Camera is not intended to be a substitute for rearview mirrors or for any other motor vehicle equipment mandated by law. Even when properly installed, our Rearview Mirror Backup Camera has a limited field of vision and do not provide a comprehensive view of the rear area of the vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely.
Package Content Mirror Backup Camera with Bluetooth® Speakerphone Backup Camera Rubber Ring Scotchloks® x 4 Signal Booster 12V charger Hardwire Mirror Power Cable (Optional) Camera Cable Cable Ties X 4 Velcro Straps 8
MOUNTING Installations The Rearview Vehicle Backup Camera Monitor mounts These instructions do not apply to all types of vehicles. They are meant only as a general guide due to the large number of vehicle makes and models. For vehicle specific questions, contact your vehicle’s manufacturer. Consult your local motor vehicle laws on the use of this product to be sure it is permitted.
WARNING: Do not pull or remove the rearview mirror CAMERA INSTALLATION without pulling apart the tension clamp. Install Rearview Vehicle Backup CAUTION: The instructions may not apply to every type of vehicle. For vehicle specific questions, contact your vehicle’s manufacturer to be sure that the installation and mounting will not degrade the safety of any system or device on your vehicle, including Federal Motor Vehicle Safety Standards.
7) Plug the camera wire to the signal booster. Ensure camera wire wires are not obstructed or tangled. 8) Remove light socket from its reverse light housing. CAUTION: It is highly recommended that you remove the bulbs as a precaution. 9) Connect camera power wires CAUTION: Before connecting camera wires, use a Volt Meter or a Multi-Meter to determine positive and the negative wires on the vehicle’s reverse light wires. Vehicle wiring may vary. Refer to the vehicle Owner’s Manual for more information. a.
Note: - - A. Power ON/OFF The preset camera angle may not be enough for all types of vehicle, adjust accordingly. The camera angle should be chosen carefully to best suit your specific vehicle because it will impact the size and location of the blind spot of the rear view camera. If the camera hinges gets loose, tighten by adjusting the screws at the back of the camera through the mounting.
NOTE: The following steps are general procedure; to To Link APB220 to your mobile phone after pairing: access Bluetooth® Menu for your mobile phone, please refer to your phone user manual.
NOTE: Speed Dial Set-up • If there is an incoming call during phonebook transfer via AT Command, the transfer process will be placed NOTE: Phonebook should be set up first to activate speed dialing. on hold. Phonebook transfer will resume after the call ends. To set up speed dialing: • • • • Phonebook Set-up via OPP The APB220 supports single contact or group contacts transfer via OPP function. For details on operating procedures, please refer to your mobile phone’s user manual.
D. Display Setting • Press M and select Display Setting • Press to enter the sub-menu • The status bar is shown on the screen. This indicates the settings level of the LCD display • Press M to select • Press +/- to adjust to desired level by +/- CONTRAST BRIGHTNESS COLOR E.
To make a call using the Speed Dial function: • Press and hold M , + or - for 2 seconds • Phone will automatically dial the number set to Speed Dial for that particular button Caller ID Display NOTE: Caller ID Display is a network service, please consult your network provider for details.
Call Waiting NOTE: Call Waiting is a network service, please consult your network provider for details.
BUTTON FUNCTION Power ON/OFF End Call Reject Call End L1 & receive L2 in OPERATION Press 1 time Press 1 time LED INDICATION RED Light Device ON but No connection BLUE Light Device ON and connected Press 1 time call waiting mode NO LED Indication Press and hold for 2 seconds YELLOW Light Standby Press 1 time Increase Volume Press repeatedly until you reach desired Scroll Upward Press repeatedly until you find desired entry/menu item volume level + Press repeatedly until you find desire
SAFE OPERATING TIPS • If you replace the tires, the area displayed on the monitor may change and you may need to adjust the camera. • There is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover. • The camera has a water resistant construction. Do not detach, disassemble or modify it. This may cause incorrect operation. Camera is water resistant but not waterproof. • Do not submerged camera in water, which can cause internal damage to the camera.
SAFETY AROUND AND BEHIND OTHER VEHICLES Using a rear-view camera is not enough to completely overcome a vehicle’s blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to avoid a backover accident. • Walk completely around your vehicle before getting in. Check for kids, toys, and pets before entering the vehicle and starting the engine. • Know where children are.
FCC / ICC Federal Communication Commission Interference Statement 21 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Caution: Any changes or modifications not expressly IMPORTANT NOTE: approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC Radiation Exposure Statements: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
