User's Manual

Installations
These instructions do not apply to all types of vehicles. They
are meant only as a general guide due to the large number of
vehicle makes and models. For vehicle specific questions,
contact your vehicle’s manufacturer.
Consult your local motor vehicle laws on the use of this product
to be sure it is permitted.
WARNING:
• Through installation of the Rearview Mirror Vehicle Back-Up
Camera with Bluetooth
®
Hands-Free Speakerphone System
you should be sure not to degrade the safety of any system
or device on your vehicle, including Federal Motor Vehicle
Safety Standards.
• Improper installation and wiring of the Rearview Mirror
Vehicle Back-Up Camera with Bluetooth
®
Hands-Free
Speakerphone System may damage the vehicle’s electrical
system, including vital vehicle computer and operating
systems. That could lead to an accident or fire, causing
property damage and/or serious personal injury. It is highly
recommended to seek professional installation advice from
a qualified auto electrician or, in the alternative, to have the
installation performed by a qualified auto electrician.
9
MOUNTING
The Rearview Vehicle Backup Camera Monitor mounts
onto existing rearview mirror. The following provides proper
mounting instructions.
NOTICE: Please ensure that monitor is secured and mounted
where it would NOT obstruct any OEM vehicle safety features.
In an event of an accident, manufacturer is not responsible for
bodily injury caused by the monitor being a projectile.
CAUTION: Ensure monitor location will not obstruct your
vision while driving.
1. Pull the tension clamp and clip to
the existing rearview mirror
2. Push the rearview mirror
speakerphone until it is
flushed against original
rearview mirror
3. Fix and secure the
mirror into position by
inserting the safety
belts on to the buckle
behind the mirror.
NOTE: Make sure that
the safety belt match
perfectly before you
insert them into the
buckle. Once the belts
are inserted, it will be
difficult to remove.