User's Manual

Note:
- The preset camera angle may not be enough for all
types of vehicle, adjust accordingly.
- The camera angle should be chosen carefully to best
suit your specific vehicle because it will impact the size
and location of the blind spot of the rear view camera.
- If the camera hinges gets loose, tighten by adjusting
the screws at the back of the camera through the
mounting.
CAUTION: Double check the camera angle from
time to time to make sure that it is always focused and
adjusted to the desired point of view.
Operations
2.4” LCD screen charging port
volume/menu +
A. Power ON/OFF
• APB220 will automatically turn ON when it is
connected to a power source
• Hold to turn APB220 ON/OFF
• When turned ON, APB220 will enter search mode
Connecting
• To search again, press once to activate search
mode
NOTE: For automatic connection, please make sure
Bluetooth
®
mode on your mobile phone is activated and
you must have successfully paired and connected to APB220
at least once in order to activate this feature.
B. Pairing/Linking
Pairing Bluetooth
®
enabled devices like mobile phones
with the APB220 Rearview Mirror Speakerphone
authorizes the devices to work with each other. This step
only needs to be performed once.
Before Pairing the APB220 Bluetooth® Speakerphone:
• Ensure the Bluetooth
®
on your mobile phone is
activated
• Ensure the APB220 Rearview Mirror Speakerphone is
plugged into a 12V power source
Follow the steps below to pair your APB220 with your
mobile phone:
• Power ON the device
• Press and hold M for 2 seconds
volume/menu -
end menu parking
assistant
• Screen will indicate Pairing Mode
send
(yellow LED)
microphone
NOTE: APB220 is now in pairing mode
(blue/red LED)
• Activate the Bluetooth
®
settings of your mobile phone
12