User's Manual

NOTE: The following steps are general procedure; to
access Bluetooth
®
Menu for your mobile phone, please
refer to your phone user manual.
• Select SET-UP or CONNECT from your mobile phone
menu
• Find and select OPTION to discover Bluetooth®
devices; establishing a connection may take several
minutes
• If found, phone display should indicate APB220 device
was detected or Select “APB220” from the list
• Phone should give you a prompt asking if you want to
pair the device
• Select OK or ACCEPT and wait for prompt to enter
passkey or PIN
• Enter the code 0000
• Select “OK” to pair and connect the APB220 and the
handset
• When pairing is complete, the APB220’s LCD will show
Connected
(Phone’s ID)
NOTE: The APB220 can pair with more than one phone,
however it can only connect to one phone at a time. If
you wish to pair to a second phone, disable or turn OFF
Bluetooth
®
on the phone already paired.
NOTE: If the APB220 and mobile handset did not
successfully pair, follow the steps below to retry pairing:
• Turn the APB220 OFF & ON
• Turn OFF all other Bluetooth
®
devices before starting
the pairing process
• Repeat the pairing instructions from the beginning
13
To Link APB220 to your mobile phone after pairing:
• Press of your APB220 or
• Establishing the connection via your mobile phone
NOTE: Make sure Bluetooth
®
has been activated on your
mobile phone before you press . (Please refer to your
mobile’s operation manual about connecting Bluetooth
®
devices)
C. Phonebook
APB220 Rearview Mirror Speakerphone can store up to
950 phone numbers. If you are trying to transfer 1100
contacts to the APB220, only the first 950 contacts will
be successfully transferred.
AT Command and OPP (Object Push Profile) function can
automatically transfer the contacts in your mobile phone
to the APB220 Rearview Mirror Speakerphone.
NOTE: Not all mobile phones support OPP or AT
Command features, please refer to your phone manual to
determine if phone supports one of these.
Phonebook Set-up via AT Command
To transfer the Phonebook from your mobile phone
via AT Command:
• Make sure the APB220 and mobile phone is connected
• Press M and Contacts will appear on the screen
• Press to enter the sub-menu
• Press +/- to select Download Contact and press to
confirm
• LCD will display Pb Loading...
Total XXX
• Once transfer is successful, LCD will display
Completed
Total XXX