User's Manual

Call Waiting
NOTE: Call Waiting is a network service, please consult
your network provider for details.
Button Functions and Operation
To answer an incoming call during a conversation:
• Press to hold Line 1 & accept the incoming call
(Line 2) or
• Press to end Line 1 & accept the incoming call
To switch calls between the two lines:
• Press to switch between lines
Interchanging APB220 and Handset
You may interchange the call between your handset and
APB220 while conversation is ongoing.
To shift from APB220 to handset or vice versa:
• Press and hold for 2 seconds
BUTTON
M
FUNCTION
Go to Menu
DTMF (Dial Tone
Modulation Frequency)
Quick Dial
Pairing
Mute / Un-mute
Make / Receive call
Voice dialing
Redial
OPERATION
Press 1 time
Press and hold for 2 seconds (Activated
only when the line is connected)
Press and hold for 2 seconds
Press and hold for 2 seconds
(Screen shows “Pairing Mode”)
Press 1 time
Press 1 time
Press and hold for 2 seconds to enter
voice dialing mode
Press 1 time
F. Parking Assistant
Conversation transfer While conversation is ongoing, press and
To turn the on-screen display guideline ON/OFF:
hold for 2 seconds
• Press once
NOTE: Interference may occur if Bluetooth
®
function &
Backup Camera function are activate at the same time.
17
Hold L1 & receive L2 in
call waiting mode
Switch between L1 & L2
in call waiting mode
Bluetooth
®
link
connection
YES
Press 1 time
Press 1 time
Press 1 time
Press 1 time