User's Manual

SAFETY AROUND AND BEHIND OTHER VEHICLES
Using a rear-view camera is not enough to completely
overcome a vehicle’s blind spot. Many preventable injuries
and deaths occur in driveways or parking lots when drivers
do not see children, pets, or others near their vehicles. Here
are a few safety tips that will help you to avoid a backover
accident.
• Walk completely around your vehicle before getting in.
Check for kids, toys, and pets before entering the vehicle
and starting the engine.
• Know where children are. Have children stand in a place
where they are in full view.
• Be aware of young children. Young children are small and
hard to see.
• Parents, caregivers and all adults need to be vigilant in
supervising children, especially when children are in the
yard, driveway or parking lot playing near parked cars.
• Roll down your window so you will be able to hear what is
happening outside your vehicle.
• Owners of SUVs, trucks, and vans need to take extra care
to avoid hitting or running over a child.
• Teach children to move away from a vehicle whenever it is
started.
Testing and Troubleshooting
Testing:
1. Connect vehicle battery cables
2. Turn ignition to “ON” position without starting the engine
3. Press monitor “ON/OFF” power button to start monitor
4. Engage parking brakes and put the car in reverse
5. Wait for monitor to show rear view image.
If you are unable to pair your mobile phone with the APB220:
• Turn OFF the APB220 and turn it ON again
• Turn OFF all other Bluetooth
®
devices before you start
pairing
• Ensure your mobile handset’s Bluetooth
®
feature is
activated. Please refer to your mobile handset user guide
for specific instructions
• Repeat pairing procedures
• Ensure the APB220 is within a maximum of 10 meters of
your mobile handset(s) or Bluetooth
®
enabled device and
there are no obstructions, such as wall or other electronic
devices, in between as it may cause interference
transmission
The APB220 Rearview Mirror Speakerphone is compliant
with and adopts the Bluetooth
®
Specification V2.1.
However, interoperability between the device and other
Bluetooth
®
-enabled products is not guaranteed because
it depends on compatibility. For more information on the
compatibility between the device and other Bluetooth
®
-
enabled products, please contact Customer Service.
20