User's Manual

IV. Product Operation and Signal Instructions
1. Receiver operation:
1.1 Power supply:
The receiver uses 12V or 24V DC power supply provided by the car cigar plug socket
1.2 Indicator description
The blue indicator is lit when the receiver is powered, and automatically enters the working state. If there is no
signal, the receiver automatically turns off LCD, and blue LED indicator flashes; when there is signal, the
image is displayed, and the LED is lit.
1.3 Receiver key description
The keys include Menu/Return, Up/Mode selection, Power/Confirm, Down, and Reversing line, as shown
below:
Menu/Return
Press to show OSD or return to the previous menu
Up/Mode
Select forward in OSD operation, and select CAM1, CAM2 or switch camera
automatically reversing screen
Power/Confirm
Confirm or enter in OSD operation, press and hold for 2S to turn off if there is
no OSD, and press to turn on
Down
Select backward in OSD operation, press and hold for 5S to clear the pair code
when there is no OSD
Line
Reversing line display selection
1.4 OSD operation
1.4.1 Pair code
After first work or the pair code is cleared, the camera image can be displayed after pairing the code.
Each channel only pairs one camera, the camera information will be automatically saved after pairing
code, and it will work automatically next time.
Press the MENU key to enter the main menu, press the Up or Down key to select SETUP, and press
the Confirm key to enter the pair code interface
Menu/Return
Up/Mode
Power/Confirm
Down
Line