User's Manual

1.4.2 Master camera selection
Channels 1 and 2 can be defined into master camera. In automatic mode, the signal of single camera
will be automatically displayed; when two cameras receive signal simultaneously, the master camera
has the priority, and the screen will automatically switch to the master camera in 3S.
Master camera selection method:
Select MASTER in the SETUP menu
Icon, press the Confirm key to enter camera selection.
Press the Up key or Down key to select camera 1 or camera 2, and press the Confirm key to show
Indicate that Camera 2 has been defined to the master camera.
1.4.3 Clear the code:
If only one camera is used, but two channels have been previously paired, the code can be cleared and
re-pair a channel.
Exit OSD state, press and hold the Down key for 5S to clear the pairing channel. Be careful to use
this feature, the paired channels will be cleared and should be re-paired.
1.4.4 Mirror/Rotate
Mirror / Rotate is to mirror or rotate the display screen to adapt to installation direction of the
camera; each channel allows individual Mirror/Rotate, select in the main menu