User's Manual

6.5 PAIR: In this option you can pair the cameras with the specific channels, press the
Pair button, through the Right/Left button can choose the channel; one channel can
only pair with one camera. After selecting the specific channel and press the pair
button there will appears the matching information as follows:
Press the Pair the button on corresponding camera and wait for a while, the
monitor which connected to the receiver will appear the images from the
cameras that have matched. Pairing succeeded.
6.6 TV OUT: In this option allow you to select the 2 different format (NTSC/PAL) for
video output resources.
6.7 Channels selection hot keys
You may select channel by using corresponding hot key as below to manually
choosing channels.
Channel 1：Up
Channel 2：Right
Channel 3：Down
Channel 4：Left；
Circulation Button：Monitor screen circularly output the image form Channel 1～
Channel4～Channel1. The receiver will skip the channels that cameras are not
available.
7 Troubleshooting
Symptom Remedy
The power does not
turn on.
z Check that the AC power cord is connected securely.
z (In case of power failure) Check the breaker.
No image display on
monitor
z Check if Monitor it is on and work under NTSC / PAL
model
z Check monitors video cable and connections.
z Check camera video cable and connections.