Instructions / Assembly

4
3. Attach Hose Reel End to the Center
Hub using (6) M6 x 15 Screws. Repeat
opposite side. See figure 3A.
Find the end of the Center Hub with
the extra threaded screw hole and insert
Water Coupler Tube through this end
first.
Attach Water Coupler Tube to the Cen-
ter Hub using the Painted Water Cou-
pler U-Bracket. See Figure 3B
Assembly Instructions
Tools Needed For Cart Assembly
(1) Screwdriver
(1) M10 Wrench or Adjustable Wrench
Figure 2
Figure 3B
Figure 1
Axles
Side Frames
1. Install Front Crank Frame to Side
Frames using two M6 X 35 Bolt Sets.
Next add Cross Brace to Side Frame
using four M6 x 35 Bolt Sets. Slide Ax-
les through tabs on the bottom of Side
Frames. See Figure 1
Cross Brace
Front Crank Frame
2. Install Wheels using 12MM Large
Washer and Cotter Pin. See Figure 2
Figure 3A
Large
Washer &
Cotter Pin
M6 x 15 Screw
Water Coupler Tube
Painted Water Coupler
U-Bracket
5
5.Attach Opposite end of the Hose
Reel Assembly to the Cross Brace
using (2) M6 x 35 Bolt Sets. See
Figure 5
4. Insert Crank Bushing into Crank U-
Bracket and attach to the Front Crank
Frame Using (2) M6 x 35 Bolt Sets. In-
sert Crank Handle through the Crank
Bushing then slide Hose Reel Assembly
onto Crank Handle securing with (2) M6
x 25 Bolt Sets. See Figure 4
Figure 4
M6X 25 Bolt Sets
M6 x 35
Bolt Set
Figure 5
M6 x 35 Bolt Sets
6. Assemble Push handle onto Cart
Frame using (2) M6 x 35 Bolt Sets. See
Figure 6
Push Handle
M6 x 35 Bolt Sets
Figure 6