Operating Manual

[phone] www.preco.com XXXXXXXX
Copyright 2019
Page 12
Keep Out/Interference Zones
Metallic and other strong radar reflecting objects must remain outside of the
Keep Out Zones defined in Figure 7. Radar reflecting objects within these areas
may affect operation. If those objects cannot be removed, testing must be
performed to determine the influence on the system’s performance.
Before permanently installing the PreView Side Defender
®
II on the vehicle, verify
that the selected sensor mounting location provides a clear detection zone.
Take the vehicle to a clear area, temporarily attach the sensor in the proposed
mounting location, apply power to the system, and verify that nothing is being
detected.
Horizontal “Keep Out”
Zone
Vertical “Keep Out”
Zone
Figure 7 - Keep Out Zones