Operating Manual

[phone] www.preco.com XXXXXXXX
Copyright 2019
Page 13
PreView
®
Daily Maintenance
Safety Message to Vehicle Operators with PreView
®
Radar Systems
1. Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death. It is necessary to read, understand and
follow all instructions shipped with the product.
2. Systems on operating equipment must be tested each day prior to the
equipment operation. The equipment operator must check for proper
operation at the beginning of every shift or safety inspection period.
3. The PreView
®
system is intended as an Object Detection System and should
not be relied upon as your first line of defense for the safe operation of the
equipment. It should be used in conjunction with established safety
programs and procedures to augment the safe operation of the equipment,
ground personnel, and adjacent property.
4. People's lives depend on the proper installation of this product in
conformance with these instructions. Should the system become
inoperative, it could jeopardize the safety or lives of those who depend on
the system.
5. The PreView
®
Object Detection System is intended for commercial use.
Proper installation of the object detection system requires a good
understanding of equipment electrical systems and procedures, along with
proficiency in the installation.
6. Store these instructions in a safe place and refer to them when maintaining
and/or reinstalling the system.