Service manual

9.25, 9.25i Treadmill

Page 10

Procedure 2.5 - Displaying the Treadmill Odometer and Error

Code Log

Procedure

1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.

2. With the PRECOR M9.25 banner scrolling, press the ENTER, SPEED

▼ and SPEED ▲

keys, simultaneously. Continue to hold the keys until the message TREADMILL

ODOMETER scrolls across the left display window. On 9.25i treadmills, press keys

RESET,6,5, sequentially.

Note:

The right display window displays total miles or kilometers on the treadmill (see Diagram 2.3).

The top display window shows the most significant bits of the number; the lower display window

shows the least significant bits of the number. The number displayed is 102,187,723 (in miles or

kilometers).

3. Press ENTER twice to return to the User ID prompt.

Diagram 2.3 - Odometer Reading For the Treadmill

000

021