Service manual

9.25, 9.25i Treadmill
Page 12
Procedure 2.6 - Selecting United States Standard or Metric
Units
Selecting United States standard units causes data to be displayed in feet, miles and pounds.
Metric data is displayed in meters, kilograms and kilometers.
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. Choose one:
IF... THEN...
You wish to verify the measurement Continue with the next step
standard the treadmill is currently using
before you change the standard
You wish to change the measurement Skip to Step 5
standard the treadmill is using
Checking the Measurement Standard
3. Press ENTER until the WEIGHT indicator light appears.
4. Watch the number displayed in the left display window while you press the SPEED
▲ key
five or six times.
Note:
If the treadmill is using United States standard units, the numbers in the left display window are
repeatable multiples of 5 (such as 160, 165, 170, 175, etc.). Otherwise, the treadmill is using
metric units.
Changing the Measurement Standard
5. Press and hold STOP to return the PRECOR M9.45 banner.
Note:
On 9.25 treadmills, releasing the QUICK START key before the SPEED
▲ key when you perform
the next step may cause the selected measurement standard to change to the alternate
measurement standard.
6. On 9.25treadmills, press the QUICK START and then the SPEED
▲ key. Hold both keys for
3–5 seconds, then release. On 9.25i treadmills, press keys 4,5,6,7, sequentially.