Owner`s manual

page 2
COMMERCIAL PRODUCTS DIVISION
Diagram 1
Hardware kit
H
J
Carefully unpack the parts from the shipping container. Open the hardware kit
and make sure that you have the following items:
(A) four hex head screws—for installing the upper column support
(B) six split lock washers—attach to screws on upper column support and
to the handrail clamp screws
(C) three screws—for installing electronic console display
(D) three split lock washers—attach to bolts on electronic console display
(E) three washers—attach to bolts on electronic console display
(F) two button-head socket bolts—for installing handrails to base frame
(G) two locknuts (nylon end)—attach to lower handrail screws
(H) two button-head screws—for installing handrails to handrail clamp
(J) two handrail rubber boots—for covering lower handrail screws at base
If any items are missing, contact your Precor Commercial Products Service
Representative at 1-800-4-PRECOR.
Note: If you have the C764 vertical handlebars, refer to the addendum for
assembly instructions.
AC
B
D
E
G
F
(B)