Owner`s manual

page 1
COMMERCIAL PRODUCTS DIVISION
Your C764 climber is carefully inspected before shipment so it should arrive in
good operating condition. Precor ships the unit in five pieces:
• base frame assembly
• upper column support
• electronic console display
• handrails (For the vertical handlebar installation, refer to
the C764 Addendum .)
• hardware kit, Owner’s Manual, and limited warranty card
(The hardware kit is shown in Diagram 1.)
To remove the climber from the wood pallet, locate the lag bolt on the pallet under
the right foot pedal (close to the casing) and remove it.
CAUTION: This unit weighs over 180 pounds. To avoid back strain and
ensure the safety of the unit and yourself, we suggest that you get
assistance before removing the base frame assembly from its container.
Unpacking the C764 Climber