Service manual

C762, C764, C764i Stairclimber
Page 20
4. If the .050 feeler gauge does not fit snugly...
THEN... OTHERWISE...
Continue with the next step. Skip to Step 7.
5. Barely loosen the bolts, lock washers, and flat washers that secure the right magnet
assembly to the climber frame (see Diagram 5.2).
Diagram 5.2 - Magnet Assemblies
Note:
Do not loosen the bolts too much. Although you must be able to move the magnet assembly
Disk Assembly
Magnet Assemblies
Cable
Clamp