Service manual

C762, C764, C764i Stairclimber
Page 38
Procedure 7.1 - Replacing the Covers
Removing the Covers
1. Turn off the climber with the circuit breaker, then unplug the power cord from the wall outlet.
2. Slide the collar up on the column.
3. Choose one:
IF... THEN...
You are removing the left cover Remove the screws that secure the
power entry module to the climber
frame. Pull the module out of the
climber, then continue with the next
step.
You are removing the right cover only Continue with the next step
4. Loosen the fastener that secures the top of the cover to the climber frame. Loosen both
screws if you are going to remove both covers.
Note:
The two screws above the pedals secure the covers to the cover bracket (see Diagram 7.1).
When you remove a cover, always remove only one of the screws. Leave the cover bracket
attached to the last cover removed.
5. Remove the screws that secure the cover to the climber frame. Set the cover aside until
maintenance operations are complete.
6. Remove the front and back cover seals.
7. If you are removing both covers...
THEN... OTHERWISE...
Repeat Step 5 for the second cover; Continue with the next step.
then continue with the next step.