Service manual

C762, C764, C764i Stairclimber
Page 55
Diagram 7.5 - Upper and Lower Ribbon Cables
Note:
The cable clips hold the lower ribbon cable away from moving components on the climber. Note
how the lower ribbon cable is folded and routed through the cable clips.
10. Remove the lower ribbon cable from the cable clips mounted on the climber frame.
Replacing the Lower Ribbon Cable
11. Gently feed one end of the ribbon cable down through the left column frame upright.
12. Connect the new lower ribbon cable to the upper ribbon cable and the lower PCA.
13. Fold the ribbon cable in half and route it through the cable clips mounted on the climber
frame. Make sure that the ribbon cable does not come in contact with moving components.
14. Position the left cover against the climber frame.
Upper
Ribbon Cable
Lower
Ribbon Cable