Service manual

C762, C764, C764i Stairclimber
Page 63
Replacing a Magnet Assembly
Do not tighten the bolts more than finger tight when you perform the next step.
5. Position the magnet assembly against the frame upright (see Diagram 7.9). Install the
fasteners that secure the magnet assembly to the frame upright.
6. If you are replacing only one magnet assembly...
THEN... OTHERWISE...
Continue with the next step. Repeat Step 5 for the second magnet
assembly; then continue with the next
step.
7. Inspect the gaps between the disk and the magnet assemblies as described in Procedure
5.1.
Diagram 7.9 - The Magnet Assembly