Service manual

C762, C764, C764i Stairclimber
Page 69
Replacing the Stairarm Belt
7. Route one end of the stairarm belt through the front of the pedal (see Diagram 7.13).
Diagram 7.13 - Routing the Stairarm Belt
8. Place and hold the end of the belt against the belt clamp weldment on the underside of the
pedal. The end of the belt should be flush with the end of the clamp.
9. Place the belt clamp against the belt positioned in the previous step.
Note:
Hold the belt clamp against the belt and slotted area on the underside of the pedal when you
perform the next step.
10. Install the fasteners that secure the belt clamp to the pedal (see Diagram 7.11).
11. Place and hold the other end of the belt against one half of the grooved belt clamp. The end
of the belt should be flush with the hole in the clamp.
12. Place the remaining side of the grooved belt clamp against the belt positioned in the
previous step.
Stairarm Belt
Stairarm