Service manual

C762, C764, C764i Stairclimber
Page 73
11. Lift the stairarm assembly from the frame weldment. Grasp the stairarm belt and lift it over
the toothed pulley. Route the belt under the idler pulley.
12. If you are replacing only one toothed pulley...
THEN... OTHERWISE...
Continue with the next step. Repeat Steps 6 through 10 for the
second pulley; then continue with the
next step.
13. Check the operation of the climber as described in Section Four, then replace the cover as
described in Procedure 7.1.