Service manual

C762, C764, C764i Stairclimber
Page 83
Diagram 7.18 - The Sheave Assembly
20. Mount the drive belt on the sheave by performing the following sub-steps:
a. Kneel on the right side of the climber and face the sheave.
b. Hold the drive belt between the 12 o'clock and 3 o'clock positions on the sheave rim.
c. Turn the sheave counterclockwise.
Note:
As you move the sheave, the belt will position itself on the rim.
d. Grasp the drive belt at the 4 o'clock position.
e. Turn the sheave counterclockwise to fully seat the belt on the sheave rim.
Sheave Assembly
Hitch Pin
Idler Arm
Clevis Pin
Disk Assembly
Idler Pulley