Operating and Maintaining the P80 Console Precor Incorporated 20031 142nd Avenue NE P.O.
Edition Information OPERATING AND MAINTAINING THE P80 CONSOLE P/N 301407-301 rev F Copyright © March 2012 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners. iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.
Intellectual Property Notice All rights, title, and interests in and to the software of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment. Precor aggressively seeks U.S.
Important Safety Instructions Important: Save these instructions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device. Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit).
6 Operating and Maintaining the P80 Console Make sure all users see a physician for a complete physical examination before they begin any fitness program, particularly if they have high blood pressure, high cholesterol or heart disease; have a family history of any of the preceding conditions; are over the age of 45; smoke; are obese; have not exercised regularly in the past year; or are taking any medication.
Important Safety Instructions 7 Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself. Ensure the equipment has adequate ventilation. Do not place anything on top of or over the equipment. Do not use on a cushioned surface that could block the ventilation opening. Assemble and operate the equipment on a solid, level surface.
8 Operating and Maintaining the P80 Console Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the owner’s manual. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use. If you plan to move the equipment, obtain help and use proper lifting techniques. Equipment Weight Restrictions: Do not use the treadmill if you weigh more than 500 pounds (225 kg).
Important Safety Instructions 9 Hazardous Materials and Proper Disposal The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
10 Operating and Maintaining the P80 Console Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Important Safety Instructions 11 Directive compliance has been verified to the following standards: EN 55022 EN 300 330-1 V1.5.1 EN 300 330-2 V1.3.1 EN 301 489-3 V1.4.1 EN 301 489-1 V1.8.1 EN 60950-1 Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console.
12 Operating and Maintaining the P80 Console Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Important Safety Instructions 13 Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS.
14 Operating and Maintaining the P80 Console Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected.
Table of Contents Important Safety Instructions ................................................... 5 Safety Precautions ................................................................................ 5 Hazardous Materials and Proper Disposal .................................... 8 Product Recycling and Disposal ....................................................... 9 Regulatory Notices for the RFID Module ....................................... 9 Regulatory Notices for Cardiovascular Exercise Equipment ..
16 Operating and Maintaining the P80 Console Beginning Your Workout ......................................................... 47 Starting a QuickStart™ Workout ................................................... 47 Starting a Featured Workout .......................................................... 47 Starting a Preset Workout ............................................................... 48 Ending a Workout .............................................................................. 49 Maintenance .
Chapter 1 Getting Started The P80 console offers administrators and users the ability to set default settings that meet their specific needs. To accomplish this, the console supports settings for different classes of users depending on their administrative rights. A guest user exercises on a piece of equipment without signing in or creating a user profile. A registered user uses a sign-in password or Preva™ Pass and creates a user profile.
18 Operating and Maintaining the P80 Console Identifying Parts of the Console The following figure provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P80 console keys Table 1.
19 Getting Started Using the Treadmill Safety Clip The treadmill is equipped with two different stop functions, which behave as follows: If the user … Then the treadmill belt … And the console … Presses down on the red Slows to a stop STOP button Shows that the exercise workout is paused Pulls on the lanyard Slows to a stop attached to the safety clip and trips the restart switch Shows the words PUSH TO RESET SWITCH and an arrow pointing to the Restart switch The restart switch is located just belo
20 Operating and Maintaining the P80 Console If the restart switch trips during exercise, perform the following steps: 1. Reattach the safety clip if necessary. 2. Press the restart switch down until it clicks, returning it to its normal position. Note: If the restart switch trips, all information about the current workout is deleted. 3. Start the workout from the beginning, reducing the time as needed to account for the amount of exercise that has been completed.
21 Getting Started Treadmill Auto Stop™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is designed to bring the treadmill to a gradual stop when it is not in use. This might occur if a user steps off the treadmill before the end of a workout and leaves the treadmill running.
22 Operating and Maintaining the P80 Console
Chapter 2 Configuring the System Settings Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. Important: A special code is required to access these settings. Do not share this code with anyone except those authorized to change system settings.
24 Operating and Maintaining the P80 Console To view the System menu: 1. On the Welcome screen, press and hold Pause. Figure 7: Pause key 2. While holding Pause, press each of the following keys once in the order presented. Referring to the diagram below, press: 1234 Channel Up Volume Down Volume Up Channel Down Figure 8: Settings security code 3. Release Pause. 4. Using the number pad on the screen, touch the following numbers to enter the password: 5651565 5. Touch OK.
25 Configuring the System Settings About System information settings provide basic information including equipment models and serial numbers. Most of these settings are for informational purposes only and cannot be modified. To view the System Info settings menu: 1. Use the administrator code and password to view the equipment settings. 2. Touch About. Table 2.
26 Operating and Maintaining the P80 Console Setting Access Detail Heartbeat Interval Only Precor Determines how often the service console communicates with the technicians can server. modify this setting. Minimum Heartbeat Interval Only Precor Minimum number of times that service the console communicates with technicians can the server in a given time period. modify this setting.
27 Configuring the System Settings Equipment Usage The Equipment Usage settings provide information on individual usage as well as cumulative equipment usage. This information and these settings are accessible only to administrators and registered service technicians. To view the Usage settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch Equipment Usage. Table 3.
28 Operating and Maintaining the P80 Console System Settings Use the System Settings to test your equipment and set parameters that benefit your users and your facility. The System Settings menu is visible only to administrators and registered service technicians. The System Settings menu contains the following sections: Connectivity Display TV Settings Workout Limits Manage Settings Precor recommends that you configure the P80 consoles in your facility by sharing setting files.
29 Configuring the System Settings Connectivity Configuring your audio, video, and network infrastructure requires expertise. Precor strongly recommends that you work with a qualified contractor to set up this infrastructure. This setting provides the following information Network Type Configuration Status IP Address Preva Server To view connectivity information: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings, then Connectivity. Table 4.
30 Operating and Maintaining the P80 Console Display These settings are configurable per console, but can also be configured using Preva™ Business Suite. The equipment must be inactive before you can change the display settings. Fitness equipment is defined as inactive if all of the following conditions are true: No registered users have logged in. The frame parts of the equipment are not moving. The touch screen has detected no input. No buttons have been pressed.
Configuring the System Settings 31 TV Settings TV Settings help you set up television channels for your users. The TV Settings are: Channel Guide Region Default Channel Skip Unnamed Channels Extensive Scan Closed Captioning Export/Import Channel Names To view TV Setting information: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings. 3. Touch Display, then Channel Guide.
32 Operating and Maintaining the P80 Console To run an extensive scan: 1. Touch System Settings. 2. On the System Settings menu, touch TV Settings. 3. Touch Extensive Scan. Note: This scan may take up to two hours to complete. To delete a channel from the Channel Guide: 1. On the Channel Guide screen, touch the listing for the channel you want to delete. 2. Touch the Delete button that appears next to the listing. 3. When asked “Are you sure?", verify that you want to proceed, then touch Yes. Table 6.
Configuring the System Settings 33 Editing the Export/Import Channel File Note: You will need to scan for channels before you can export the file. If you have not scanned for channels, refer to Channel Configurations in the preceding section. Exporting the channel list from the fitness equipment creates a file called channel-list.ini. This file can be used to specify channel names in languages that are not yet supported by the P80 console. To export this file from your console: 1.
34 Operating and Maintaining the P80 Console To edit the file and reload it: Note: You will need a UTF-8 capable editor program to open the channel-list.ini file. Such programs are available free on the internet. 1. Using the editor, open the channel_list.ini file and edit the channel names on the right side of the equal sign. Do not change the information on the left side of the equal sign, or the equal sign itself. 2. Save the file and close the editor.
35 Configuring the System Settings To modify the Workout Limits settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings, then Workout Limits. Table 7.
36 Operating and Maintaining the P80 Console Manage Settings Use the Manage Settings feature to save your personalized equipment settings to a USB drive, or to import new software updates from a USB drive. Precor recommends that you configure the P80 consoles in your facility by sharing setting files. The easiest way to do this is to configure one P80 console by hand for each type of fitness equipment. For example, configure one treadmill console, one EFX console, one AMT console, and so on.
Chapter 3 Introducing Users to the P80 Console The P80 console offers clear visuals and a touch-screen layout that encourages program exploration. Multiple preset workouts are designed to help individual users meet their fitness goals, and the console keys and durable motion controls are responsive and easy to use.
38 Operating and Maintaining the P80 Console Changing the Default Language The Welcome screen displays in a default language selected for your region. To change the default language before beginning your workout: 1. On the Welcome screen, touch the language icon. Figure 9: Language icon 2. On the Language screen, select your language choice and touch OK. The screens will now display in your preferred language.
Introducing Users to the P80 Console 39 As you work out, your perspiration will help transmit your heart rate signal. If you have difficulty using the handheld grips to determine your heart rate, try the sensors again later in the workout to see if you can obtain a heart rate signal. If the touch heart rate feature does not work for you, Precor recommends that you use a chest transmitter strap.
40 Operating and Maintaining the P80 Console Using a Chest Strap Transmitter WARNING Signals used by the Chest Strap Transmitter (or heart rate strap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your Chest Strap Transmitter and implanted device before using a Chest Strap Transmitter. Wearing a chest strap transmitter during your workout provides steady heart rate information.
Introducing Users to the P80 Console 41 Using the View Channels and View Buttons There are three primary screen views that make certain information visible during your workout. You can change the look and information provided on the screen by at anytime using the Views button. Workout View – Shows panels, icon bar, and the status bar. This view allows you to focus fully on your workout. Status View – Shows only the status bar and icon bar, leaving the center of the console for media viewing.
42 Operating and Maintaining the P80 Console To change views: 1. The default view is the Workout View. Slide the panels side to side on the screen to see the media panel. 2. Press Views twice to see the Status view. 3. Press Views a third time to make the Status Bar disappear leaving only the Media view. Using the Media Panel Use the Media panel to select a media source. To choose a media source: 1.
Introducing Users to the P80 Console 43 Connecting and Using Your iPod® You can listen to your favorite music and control your iPod directly from the console. To connect your iPod: 1. Insert the iPod into the connector at the top of the console and place your iPod securely in the pocket provided. The media panel displays the words Now Playing iPod along with the name of the song currently playing. 2. Plug your headphones into the console.
44 Operating and Maintaining the P80 Console Using the Workout Progress Panel Use the Workout Progress panel to customize your workout. This is the first panel that displays once you select a workout or press GO. If you are on the Media panel, there are two ways to return to the Workout Progress panel. To return to the Workout Progress panel: 1. On the Media panel, touch the Workout icon, or slide the right edge of the next panel across the screen. 2.
45 Introducing Users to the P80 Console Using the Preva Net Icon WARNING For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
46 Operating and Maintaining the P80 Console
Chapter 4 Beginning Your Workout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The P80 console offers many different workout options. The following sections explain the type of workouts available and how to get started using them. Starting a QuickStart™ Workout The QuickStart workout begins your workout in the Manual mode. Default calculations, such as calories burned, are based on a 150 pound (68 kg), 35-year old individual.
48 Operating and Maintaining the P80 Console Starting a Featured Workout The Featured Workout appears in a panel on the Welcome Screen. Use Featured Workouts to explore the fitness benefits of preset programs and to add variety to your workout. To begin a Featured Workout, touch Go on the Featured Workout panel. Starting a Preset Workout Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions.
49 Beginning Your Workout Table 10. Preset workout descriptions Goal Workout Details Lose Weight Choose from several courses designed to encourage weight loss. Be Fit Maintain your fitness level so you can stay active and fit. Get Toned Tone your legs. Pick a focus of calf, thigh, or gluteal region. Push Performance Choose a high-intensity interval or work on distance training. Test Your Fitness Test your fitness level based on your age and weight.
50 Operating and Maintaining the P80 Console Table 11. Examples of Personal Information settings Setting Setting Options Default Access Value Age 35 Admin/Tech: Enter age as a value or a None range. 170 Admin/Tech: Enter weight as a value or None a range.
Beginning Your Workout 51 Adjusting the Workout Intensity To adjust the equipment incline, speed, and/or resistance, use the motion controls located just below the console keys. Figure 16: Motion controls Adjust the motion controls, upward or downward, to change the incline, speed, or resistance. Figure 17: Adjust motion controls up or down Many preset workouts will adjust these settings automatically to meet the workout intensity.
52 Operating and Maintaining the P80 Console Viewing Your Workout Status While Exercising The Status Bar contains status measurements and is visible across the top of the viewing screen. Information displayed in the Status Bar helps you measure how your body is responding to the exercise session.
53 Beginning Your Workout Scoring Your Fitness Workout This information helps you interpret your score for the Test Your Fitness workout. The score for this test is determined by this formula: Rate of oxygen (O2) consumption, in ml per minute, modified for the user’s maximum heart rate (220 - age), divided by the user’s weight in kilograms. Table 12.
54 Operating and Maintaining the P80 Console
Chapter 5 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment uses an optional power adapter, disconnect the adapter.
56 Operating and Maintaining the P80 Console Important: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and void the Precor Limited Warranty. Never pour water or spray liquids directly on the console or console’s screen. It is important to avoid using any corrosive chemicals on the console or screen. Always dampen the cloth and then clean the screen. Be sure to spray the cleaning liquid onto the cloth, not the screen, so that drips do not seep into the console.
Operating and Maintaining the P80 Console Precor Incorporated 20031 142nd Avenue NE P.O.
Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O.
Edition Information ASSEMBLING AND MAINTAINING RBK 800-SERIES RECUMBENT EXERCISE BIKES P/N 300716-201 rev C Copyright © February 2011 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners.
Important Safety Instructions Read the following precautions thoroughly before you begin assembly, and save them afterward for future reference. Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices.
4 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Use the power adapter provided with the equipment. Plug the power adapter into an appropriate, grounded power outlet as marked on the equipment. Care should be taken when mounting or dismounting the equipment. Read, understand, and test the emergency stop procedures before use. Keep the power cord or optional power adapter and plug away from heated surfaces.
Important Safety Instructions If you plan to move the equipment, obtain help and use proper lifting techniques. Refer to the "Moving the Equipment" section of the assembly and maintenance guide. Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) products are being used or where oxygen is being administered.
6 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Hazardous Materials and Proper Disposal The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
7 Important Safety Instructions Radio Frequency Interference (RFI) The RFID module conforms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
8 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes European Applications CE compliance is claimed to the following directives: 1999/5/EC R&TTE Directive 2006/95/EC LVD Directive 2002/95/EC RoHS Directive Directive compliance has been verified to the following standards: EN 55022 EN 300 330-1 V1.5.1 EN 300 330-2 V1.3.1 EN 301 489-3 V1.4.1 EN 301 489-1 V1.8.
9 Important Safety Instructions Radio Frequency Interference (RFI) This Precor exercise equipment conforms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
10 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected.
Table of Contents Important Safety Instructions ................................................... 3 Safety Precautions .................................................................................3 Educating Users .................................................................................... 5 Hazardous Materials and Proper Disposal .................................... 6 Product Recycling and Disposal .......................................................
12 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Maintenance ............................................................................ 35 Daily Cleaning ......................................................................................35 Daily Inspection .................................................................................. 36 Quarterly Maintenance .....................................................................37 Storing the Chest Strap........................
Chapter 1 Assembling the Exercise Bike Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment.
14 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Unpacking the Equipment The shipping container for Precision Series exercise bikes consists of the following items: Wooden pallet Cardboard base Cardboard cover WARNING Do not attempt to move the equipment off of the pallet by yourself. Have at least one other person help you, and use safe lifting techniques. To unpack the bike: 1. Carefully remove all staples securing the cover to the cardboard base. 2.
15 Assembling the Exercise Bike Hardware Kit (not to scale) Before you begin the assembly, verify that the following hardware items are packed with the equipment.
16 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Attaching the Seat Back and Bottle Holder While the equipment is in use, the seat back flexes to support users of different shapes and sizes. Underneath the seat back, the bottle holder accommodates both left-handed and right-handed users. To attach the seat back: 1. Insert the lower front edge of the seat back assembly under the seat. 2.
17 Assembling the Exercise Bike To attach the bottle holder: 1. Position the bottle holder so that it wraps around the seat back assembly and rests on the tab on the back of the assembly. The front edges of the bottle holder should rest on the handlebars and the two snap-in tabs should line up with the small rectangular holes on the seat back assembly. 2. Press the bottle holder forward until it locks into place.
18 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes 3. Remove the three #10 x 1-inch self-tapping screws holding the rear cover in place, then lift it off. Figure 4: Rear cover removal 4. Remove the three #10 x 1-inch self-tapping screws holding the left side cover in place, then pull the cover away from the body assembly. Guide the cover around the pedal crank, then remove it and set it aside. Figure 5: Left side cover removal 5.
Assembling the Exercise Bike 19 To install the upright support and prepare the cables for connection to the console: 1. Attach the lower ends of the following cables to the inner side of the jack panel: Ethernet cable Television cable (for P80 console) Power cable (for P80 console) 2. Slide the jack panel back into its bracket in the right side cover. 3. Using a piece of tape or a plastic tie, bind together the upper ends of all cables. 4.
20 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes 6. Insert the two upright support mounting screws through the openings on the support and into the screw holes on the body assembly. Tighten the mounting screws completely using a ³₈-inch hex wrench. Figure 7: Bolting the upright support into place Important: In the following two steps, be extremely careful not to trap or pinch any of the cables between the bike frame and any of the covers. 7.
21 Assembling the Exercise Bike Making Sure the Unit Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. To level the unit: 1. Gently rock the unit. If there is any movement, ask your assistant to tip the unit to one side while you locate the adjustable feet. 2. Correct the height of each adjustable foot as follows.
22 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes
Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and connector locations whenever possible. The installation sequence for any of them is as follows: Threading the cable assembly Connecting cables Completing the installation (tightening the mounting screws and attaching the back cover) The following sections describe how to perform these tasks.
24 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Important: Before you begin the following procedure, remove the rear cover from the control console. To remove the cover, use your fingernails to pry the lower edge loose, then swing the cover up and out as shown in the following illustration. Figure 8: Removing the access cover from the P80 console To thread the cable assembly: 1.
25 Installing the Console Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 10: Cable connections, P80 console Table 1.
26 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Cable Connector Type Heart rate sensors Four-contact strip, keyed Safety key (treadmills only) Six-contact strip, keyed CSAFE Eight-contact modular, on flat gray cable Auto Stop sensor (treadmills only) Four-contact strip, keyed Circuit Connector Location To simplify installation and maintenance, route and connect cables 1 through 5 according to the following instructions.
Installing the Console 27 The following illustration shows how the cable is positioned once it is installed. Figure 11: Connecting the television cable Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise caution when connecting the cables.
28 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following illustration shows how the cable should look once it is installed.
Installing the Console 29 Completing the Console Installation (P80) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the neck tube. 2.
30 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 15: Console positioning on base unit 4. Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so. 5.
31 Installing the Console Connecting Cables (P30) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 16: Cable connections, P30 console Table 2.
32 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Connecting Cables (P20) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 17: Cable connections, P20 console Table 3.
Installing the Console 33 Completing the Console Installation (P30 and P20) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the neck tube. 2.
34 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes
Chapter 3 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks.
36 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com) CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipment.
37 Maintenance Quarterly Maintenance Precor recommends that you clean and inspect the equipment more thoroughly once every three months. To perform quarterly maintenance: 1. Remove the cover panels. 2. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static buildup). 3. Check the tension of both belts. 4. Replace the cover panels. 5.
38 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Moving the Equipment The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adult assistant and use proper lifting techniques. If the equipment includes roller wheels on one end, use the wheels to reduce the load on yourself and your assistant. To move the exercise bike: 1. Disconnect, unplug, and remove all external connections (television, Ethernet, and power). 2.
Chapter 4 Self-Powered Features Important: This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P40 or P20 consoles. However, P80 consoles must be connected to AC power through their power supplies to operate. For this reason, this chapter does not apply to units equipped with P80 consoles. On self-powered equipment, the system initializes and displays the Welcome screen when a user starts exercising.
40 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses. If no movement is detected or the rate of motion remains below the minimum, the indicator changes as the countdown continues.
Self-Powered Features 41 Using the Optional Power Adapter After connecting the power adapter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: When the optional power adapter is in use, make sure that the power supply cord does not create a safety hazard. Keep it out of the way of traffic and moving parts. If the power supply cord or power conversion module is damaged, it must be replaced.
42 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service. CAUTION: The battery stored inside the equipment contains hazardous materials and must be disposed of according to Hazardous Waste Regulations. Refer to Hazardous Materials and Proper Disposal.
Chapter 5 Commercial Cardiovascular Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set forth below.
44 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Options / Accessories Many options or accessories have components that are connected internally or mounted inside the electronic console. The following guidelines determine the warranty for these components.
Commercial Cardiovascular Equipment Limited Warranty 45 This Limited Warranty shall not apply to: 1. Software version upgrades. 2. Software defects that do not materially and negatively affect the normal performance of the product under normal conditions of use. 3.
46 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.
Commercial Cardiovascular Equipment Limited Warranty 47
48 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes
Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O.
