Operating and Maintaining the P30 Console Precor Incorporated 20031 142nd Avenue NE P.O.
Edition Information OPERATING AND MAINTAINING THE P30 CONSOLE P/N 301096-301 rev E Copyright © December 2012 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, EFX, and Preva are registered trademarks of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners.
Important Safety Instructions Important: Save these instructions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device. Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit).
4 Operating and Maintaining the P30 Console Make sure all users see a physician for a complete physical examination before they begin any fitness program, particularly if they have high blood pressure, high cholesterol or heart disease; have a family history of any of the preceding conditions; are over the age of 45; smoke; are obese; have not exercised regularly in the past year; or are taking any medication.
Important Safety Instructions 5 For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. Read, understand, and test the emergency stop procedures before use. Keep the power cord or optional power adapter and plug away from heated surfaces. Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself. Ensure the equipment has adequate ventilation.
6 Operating and Maintaining the P30 Console Keep equipment away from water and moisture. Avoid dropping anything on or spilling anything inside the equipment to prevent electric shock or damage to the electronics. When using the treadmill, always attach the safety clip to your clothing before beginning your workout. Failure to use the safety clip may pose a greater risk of injury in the event of a fall. Keep in mind that heart rate monitors are not medical devices.
Important Safety Instructions 7 Do not set anything on the stationary handrails, handlebars, control console, or covers. Place liquids, magazines, and books in the appropriate receptacles. Do not lean on or pull on the console at any time. CAUTION: DO NOT remove the cover, or you may risk injury due to electric shock. Read the assembly and maintenance guide before operating. There are no user-serviceable parts inside. Contact Customer Support if the equipment needs servicing.
8 Operating and Maintaining the P30 Console Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards.
Important Safety Instructions 9 Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003.
10 Operating and Maintaining the P30 Console Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS.
Important Safety Instructions 11 Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected.
12 Operating and Maintaining the P30 Console
Table of Contents Important Safety Instructions ................................................... 3 Safety Precautions .................................................................................3 Hazardous Materials and Proper Disposal .................................... 7 Product Recycling and Disposal ....................................................... 7 Regulatory Notices for Cardiovascular Exercise Equipment..... 8 Electrical Recommendations: 120 V and 240 V Treadmills .....
14 Operating and Maintaining the P30 Console
Chapter 1 Getting Started The P30 console offers administrators the ability to set default values that meet their specific needs. These settings include items like language, units of measure, and setting a maximum allowed workout time for each piece of equipment. Activating the Console for Self-Powered Equipment Precor equipment is either self-powered or externally powered using an optional power adapter. Self-powered equipment requires the user exercise to initialize the console.
16 Operating and Maintaining the P30 Console Optional Use of the Power Adapter An optional AC power adapter provides sustained power to the equipment. This adapter allows you to change settings without having to pedal the equipment. To purchase the power adapter, contact your dealer. If you purchase the optional power adapter, you must also purchase the internal cable kit. The kit supplies the cable, bracket, and fasteners that connect the power adapter to the lower electronics board.
17 Getting Started Identifying Parts of the Console The following figure provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P30 console keys Table 1.
18 Operating and Maintaining the P30 Console Number Part Name • • • • Muscle Monitor - EFX Details • Stride Length AMT • Rate per Minute Climber • - Bike, Treadmill Lower Display Workouts The Muscle Monitor displays the muscles used to perform that workout. Stride Length describes the length of your steps during a workout. Rate per Minute displays the number of meters, feet, or steps that a user has gained during a workout.
19 Getting Started Number Part Name Options Details • • Press to enter Goals, Language, Weight, Age, and Target Heart Rate information, More Options Press More Metrics to view additional metric information Metrics: • Percent Complete • Time in Zone • Segment Time Remaining • Average Speed • Pace - Treadmill only • Calories per Minute • Calories per Hour • WATTS • METS • Target HR • Average HR • Elevations - Treadmill and climber only • Stride Length - AMT only • Show All •
20 Operating and Maintaining the P30 Console Number Part Name Details Incline or Resistance Indicator Treadmill, EFX (dual), climber, and TM AMT with Open Stride Number pad Use to enter numerical information such as age, weight, and passwords. Press Clear to delete the numbers entered. Press Enter after you have entered numbers on this number pad.
Chapter 2 Setting Up the Console Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. The System Settings categories are: Club Settings Informational Display System Settings System Setting features remain hidden from club patrons and can only be accessed using special keypresses.
22 Operating and Maintaining the P30 Console The equipment is in the Welcome state when it is on, but not actually in use. This means that there is no exercise session, data entry, or diagnostic operation in progress. When the equipment is in the Welcome state: PRECOR scrolls on the lower text display. SELECT A WORKOUT OR PRESS QUICKSTART TO BEGIN scrolls in the upper text display. The heart rate signal is the only segment activated. On the treadmill, the belt is not moving and the lift motor is off.
Setting Up the Console 23 Setting Club Parameter Values Use this information to customize the equipment for your setting. Safety Code (Treadmill only) Value Range: Enabled or Disabled (Default: Disabled) When the equipment is shipped from the factory, the safety code protection feature is disabled. If you enable the safety code, your users will need to enter a four digit number to begin their exercise session and start the running belt. The code is 1 2 3 4.
24 Operating and Maintaining the P30 Console Set Max Workout Time (All Equipment) Value Range: 1 to 240 minutes (Default: 60 minutes) You can set a maximum workout time per session. Choose a time limit between 1 and 240 minutes, or select No Limit if you do not want to set a time limit. For example, if you set the time limit to 20 minutes, users can only enter a workout time between 1 and 20 minutes. Select No Limit if you do not want to set a time limit.
25 Setting Up the Console Creating a Custom Workout Value Range: ON or OFF (Default Value: OFF) Create a customized program for your workout. Note: This option is not available on all equipment. To create a custom program: 1. At the SET CUSTOM PROGRAM prompt, press OK. The program profile appears in the display and a blinking column indicates your starting point. 2. Press the down arrow key on the navigational keypad to select the column you want to change. 3.
26 Operating and Maintaining the P30 Console 6. When you have finished creating your program, press OK to save the program profile, and return to the Welcome banner. Press BACK, to exit this setting without saving your changes to the custom profile. Set Speed Limit (Treadmill only) Value Range: Full speed range of equipment (Default: Maximum speed) This setting limits how fast the running belt moves and, consequently, the number of speed settings that are available to the user.
27 Setting Up the Console Set Resistance Range (Bike only) Value Range: High, Medium, or Low (Default: High) You can set a low, medium, or high base resistance on the recumbent or upright bikes. There are 25 levels of resistance within each base setting, but the base setting affects the overall resistance range. The following ranges are available: High: Provides full resistance range. Medium: Provides approximately two thirds of the resistance that is available within the high group setting.
28 Operating and Maintaining the P30 Console Viewing the Informational Displays Information Display settings are values that provide you with information about the equipment. Types of information contained in this setting group include, an event log, software and equipment serial numbers, and usage information. To view the System settings: 1. At the Welcome banner, press Pause. 2. Press the following number keys in sequence to enter the password: 65 3. Press Enter.
29 Setting Up the Console Product Value AMT - BELT USAGE Newer Models Only Information provided • • • All HOUR METER • • Belt Stride Count: Tracks the number of strides on equipment. Stride Count Reset: Reset increases by one each time a reset is performed. Odometer at Last Reset: Records the odometer reading at the time the belt was changed. The equipment odometer continues to count forward after the belt change. Displays the number of hours that the equipment has been in use.
30 Operating and Maintaining the P30 Console Event Log The event log holds a maximum of 30 events. After the log reaches 30 events, older events are erased to make room for newer ones. Each event log entry contains the following information: Event number Odometer value when the event occurred Hour meter value at the time the event occurred Current drawn by the motor when the event occurred (treadmill only) The following table contains a list of events detectable by the software. Table 5.
31 Setting Up the Console Event Description of Event Number 29 Excessive AC input current 30 Communications event lower board to upper board 31 Incorrect Communications event upper board to lower board 32 Communication event upper board to lower board 33 Incorrect communications event lower board to upper board 37 E-STOP error (treadmill only) 40 Lift motion detected 42 Lift position value out of range 43 Zero switch not found 44 Un-commanded lift motion 45 Lift going in the wrong dir
32 Operating and Maintaining the P30 Console User ID Entry with CSAFE Equipment This equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAFE master device, the user is prompted to press ENTER and begin an identification process. The user ID is displayed as five zeros and indicates the starting point. The following table describes key functions while in CSAFE mode. Table 6. CSAFE access keys Keys Function Number Keypad Use the number keys to enter a user ID.
Chapter 3 Introducing Users to the P30 Console CAUTION: Before beginning any fitness program, see your physician for a thorough physical examination. Seek advice from your physician to learn the target heart rate appropriate for your fitness level. The P30 console offers an easy-to-follow display and multiple programs to help people meet their exercise needs.
34 Operating and Maintaining the P30 Console When gripping the sensors, do not grip tightly. Keep a loose, cupping hold. Holding the grips tightly can affect the reading. As you work out, your perspiration will help transmit your heart rate signal. If you have difficulty using the handheld grips to determine your heart rate, try the sensors again later in the workout to see if you can obtain a heart rate signal.
35 Introducing Users to the P30 Console Using a Chest Strap Transmitter WARNING Signals used by the Chest Strap Transmitter (or heart rate strap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your Chest Strap Transmitter and implanted device before using a Chest Strap Transmitter. Wearing a chest strap transmitter during your workout provides steady heart rate information.
36 Operating and Maintaining the P30 Console Using the Treadmill Safety Clip The treadmill is equipped with two different stop functions, which behave as follows: If the user … Then the And the console … treadmill belt … Presses down on the red Slows to a stop Shows that the exercise STOP button workout is paused Pulls on the lanyard Slows to a stop attached to the safety clip and trips the restart switch Shows the words PUSH TO RESET SWITCH and an arrow pointing to the Restart switch The restart swi
Introducing Users to the P30 Console 37 If the restart switch trips during exercise, perform the following steps: 1. Reattach the safety clip if necessary. 2. Press the restart switch down until it clicks, returning it to its normal position. Note: If the restart switch trips, all information about the current workout is deleted. 3. Start the workout from the beginning, reducing the time as needed to account for the amount of exercise that has been completed.
38 Operating and Maintaining the P30 Console Treadmill Auto Stop™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is designed to bring the treadmill to a gradual stop when it is not in use. This might occur if a user steps off the treadmill before the end of a workout and leaves the treadmill running.
Chapter 4 Starting a Workout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The equipment is in the Welcome state when the words SELECT A WORKOUT OR PRESS QUICKSTART TO BEGIN scroll across the scrolling upper text display and PRECOR scrolls on the lower text display. If the equipment is connected to CSAFE, the words SELECT A WORKOUT, PRESS QUICKSTART, OR ENTER TO BEGIN scroll across the upper text display.
40 Operating and Maintaining the P30 Console Starting a Preset Programmed Workout Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions. Most P30 equipment contains multiple preset workouts.
41 Starting a Workout To choose a language setting before you begin exercising: 1. From the Welcome banner, press OPTIONS. 2. Press OPTIONS again to choose the Language option, and press OK. 3. Use the Up and Down arrows to navigate the list of available languages. To select a language, press OK. Language choices are: English, Deutsch, Espanol, Francais, Nederlands, Portugues, Rucckijj, and Italiano. 4. To continue to the next option category, press the Up or Down arrows.
42 Operating and Maintaining the P30 Console Pausing and Resuming an Exercise Session When you interrupt a workout, the equipment responds in one of two ways, depending on how it is powered. Paused (Externally Powered Equipment) When the session is paused, the belt speed is slowly reduced to zero, or the resistance is slowly reduced to the minimum. The lift motor is turned off leaving the incline or crossramp at its current position. Data entry is canceled.
43 Starting a Workout If you performed a fitness test exercise program, an initial message presents a fitness score. The next two messages display the user’s average and maximum heart rate during the session. These messages are only displayed if heart rate data was acquired during the session, i.e., a valid heart rate number was displayed at least once during the session. The summary state times out in two minutes, causing a return to the Welcome banner.
44 Operating and Maintaining the P30 Console Programs Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions. In the following figures, the elevated areas show the work expenditure for each preset program. Manual During this workout, resistance and speed changes are completely under your control. The profile is initially a flat line.
45 Starting a Workout Variety During this workout, resistance or ramp/incline vary throughout the workout in a random pattern. Performance Note: When a user presses PERFORMANCE, the message WORKOUT NOT AVAILABLE will scroll in the upper text display, if the console is set to HIDE PROGRAMS in the Settings menu. The Fitness Test, available by pressing the PERFORMANCE key, provides a means of comparing your fitness level with the official fitness test of the International Association of Firefighters (IAFF).
46 Operating and Maintaining the P30 Console Rolling Hill (Climber only) This cardio-conditioning program provides a high step rate. Like the Aerobic program, it involves several “peaks” and “valleys” in step rate; however, the dips in intensity during “rest” periods are smaller, resulting in more consistent intensity. You can override the settings for each column. The changes also raise or lower the columns on the remaining portion of the program profile.
Chapter 5 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment uses an optional power adapter, disconnect the adapter.
48 Operating and Maintaining the P30 Console Changing the Belt (Newer Model AMT Only) The newer model AMT uses belts to provide motion. These belts eventually wear and must be replaced. When the belt stride count reaches 90 million, the message BELTS MUST BE CHANGED SOON scrolls on the Welcome screen. While this message appears, the AMT operates normally. Important: If this message displays on your AMT, please contact Precor Customer Support for assistance.
Operating and Maintaining the P30 Console Precor Incorporated 20031 142nd Avenue NE P.O.
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O.
Edition Information ASSEMBLING AND MAINTAINING UBK 800-SERIES UPRIGHT EXERCISE BIKES P/N 300715-241 rev D Copyright © October 2012 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, EFX, and Preva are registered trademarks of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners.
Important Safety Instructions Important: Save these instructions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device. Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit).
4 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices. These precautions include the following: Read all instructions in this guide before installing and using the equipment and follow any labels on the equipment.
Important Safety Instructions Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
6 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Treadmills—a minimum of 0.5 m (19.7 in.) on each side of the treadmill and 2 m (78 in.) behind the machine. Cardio equipment other than treadmills—a minimum of 0.5 m (19.7 in.
Important Safety Instructions 7 Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the owner’s manual. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use. If you plan to move the equipment, obtain help and use proper lifting techniques. Equipment Weight Restrictions: Do not use the treadmill if you weigh more than 500 pounds (225 kg).
8 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Educating Users Take time to educate users about the Important Safety Instructions found in both the User Reference Manual and Product Owner’s Manual. Explain to your club or facility patrons that they should observe the following precautions: Hold onto a stationary handrail or handlebar while assuming the starting position on the equipment. Face the console at all times.
9 Important Safety Instructions Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F). Radio Frequency Interference (RFI) The RFID module conforms to the following national standards defining acceptable limits for radio frequency interference (RFI).
10 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003.
11 Important Safety Instructions Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards.
12 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Important Safety Instructions 13 Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected.
14 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals. You may want to check in for updated information from time to time.
Table of Contents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 4 Educating Users .................................................................................... 8 Hazardous Materials and Proper Disposal .................................... 8 Product Recycling and Disposal .......................................................
16 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Maintenance .............................................................................. 43 Daily Cleaning ..................................................................................... 43 Daily Inspection .................................................................................. 44 Quarterly Maintenance .................................................................... 45 Storing the Chest Strap........................
Chapter 1 Assembling the Exercise Bike Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment.
18 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Unpacking the Equipment The shipping container for Precision Series exercise bikes consists of the following items: Wooden pallet Cardboard base Cardboard cover WARNING Do not attempt to move the equipment off of the pallet by yourself. Have at least one other person help you, and use safe lifting techniques. To unpack the bike: 1. Carefully remove all staples securing the cover to the cardboard base. 2.
19 Assembling the Exercise Bike Hardware Kit (not to scale) Before you begin the assembly, verify that the following hardware items are packed with the equipment.
20 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Installing the Upright Support and Cables DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console is properly installed. Before you begin this procedure, retrieve the cables for the console that you plan to install on this exercise bike. The cables are packed with the console. Note: You will need the help of another person while performing the procedure.
Assembling the Exercise Bike 21 4. Remove the four #10 x 1-inch self-tapping screws holding the left side cover in place, then pull the cover away from the body assembly. Guide the cover around the pedal crank, then remove it and set it aside. Figure 4: Side cover removal 5. Remove the tape holding the base unit data cable in place inside the upright support channel. 6. Slide the jack panel up and out of its bracket in the right side cover.
22 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes 7. Using a piece of tape or a plastic tie, bind together the upper ends of all cables. 8. While your assistant holds the upright support in place over the body assembly, thread the cables upward through the support. When you are finished, use a piece of tape to secure the upper connectors of the cables at the top of the support. 9.
Assembling the Exercise Bike 23 10. Insert the two upright support mounting screws through the openings on the support and into the screw holes on the body assembly. Tighten the mounting screws completely using a ³₈-inch hex wrench. Figure 6: Bolting the upright support into place Important: In the following two steps, be extremely careful not to trap or pinch any of the cables between the bike frame and any of the covers. 11.
24 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Installing the Bottle Holder The bottle holder attaches to a plastic support that has been mounted on the upright support at the factory. To install the bottle holder: 1. Position the bottle holder on its support so that the three tabs on the bottle holder fit into the three rectangular holes in the support. 2.
Assembling the Exercise Bike 25 Installing the Handlebars After the upright support and the bottle holder are securely in place, install the handlebar assembly and route the heart rate sensor cable through the support. To install the handlebars: 1. Position the handlebars over the brackets near the top of the upright support, as shown in the following illustration. The open ends of the assembly should face up and forward. Figure 8: Installing the handlebars 2.
26 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Making Sure the Unit Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. To level the unit: 1. Gently rock the unit. If there is any movement, ask your assistant to tip the unit to one side while you locate the adjustable feet. 2. Correct the height of each adjustable foot as follows.
Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and connector locations whenever possible. The installation sequence for any of them is as follows: Threading the cable assembly Connecting cables Completing the installation (tightening the mounting screws and attaching the back cover) The following sections describe how to perform these tasks.
28 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Threading the Cable Assembly (P80) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on the console with the console mount, you must make sure that the cable assembly passes correctly through the openings in both components.
29 Installing the Console 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 10: Console positioning on base unit 4. Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.
30 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors.
31 Installing the Console Table 1.
32 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes 3. Attach the connector on the cable to the connector on the tuner cable and tighten the two connectors securely using two ⁷₁₆-inch open-end wrenches. Position both connectors above the upper right corner of the back plate. 4. Use a plastic tie to secure the connectors to the top of the back plate.
Installing the Console 33 Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise caution when connecting the cables. The black Ethernet cable connects to a jack just underneath the perforated metal bracket at the very top of the opening in the console.
34 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following illustration shows how the cable should look once it is installed.
Installing the Console Connecting the Power Cable Route the power cable through the cutaway opening at the upper left corner of the back plate. In the nearby opening within the steel console framework, locate the socket that matches the power cable plug and connect the power cable to it. Note: Be sure that the latch on the plug clicks into place on the socket. The following illustration shows how the cable should look once it is installed.
36 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Completing the Console Installation (P80) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the neck tube. 2.
37 Installing the Console 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 16: Console positioning on base unit 4. Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.
38 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes 5. Pull all cables upward and forward until you can drape them over the top of the console’s back plate. Figure 17: Cable positioning Connecting Cables (P30 and P10) Important: Pass all cables through the semicircular opening just above the console mount, as shown in the following figure. Do not attempt to route any cables through other openings or through the steel channel above the mount.
Installing the Console 39 After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors.
40 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Table 2.
Installing the Console 41 Completing the Console Installation (P30 and P10) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed extra cable back into the neck tube. 2.
42 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operational: 1. Begin exercising on the equipment. 2. Grasp both touch-sensitive handlebars. Note: The heart rate is read within ten seconds. During that time, the heart on the display flashes. You must maintain contact with both metal plates on each handlebar to ensure an accurate reading. 3. Look at the HEART RATE display.
Chapter 3 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks.
44 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com) CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipment.
45 Maintenance Quarterly Maintenance Precor recommends that you clean and inspect the equipment more thoroughly once every three months. To perform quarterly maintenance: 1. Remove the cover panels. 2. Vacuum out any debris, being careful not to bring the vacuum cleaner nozzle too close to any circuit board (unless your vacuum cleaner is protected against static buildup). 3. Check the tension of both belts. 4. Replace the cover panels. 5.
46 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Moving the Equipment The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adult assistant and use proper lifting techniques. If the equipment includes roller wheels on one end, use the wheels to reduce the load on yourself and your assistant. To move the exercise bike: 1. Disconnect, unplug, and remove all external connections (television, Ethernet, and power). 2.
Chapter 4 Self-Powered Features Important: This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P30 or P10 consoles. However, P80 consoles must be connected to AC power through their power supplies to operate. For this reason, this chapter does not apply to units equipped with P80 consoles. On self-powered equipment, the system initializes and displays the Welcome screen when a user starts exercising.
48 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses. If no movement is detected or the rate of motion remains below the minimum, the indicator changes as the countdown continues.
Self-Powered Features 49 Using the Optional Power Adapter After connecting the power adapter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: When the optional power adapter is in use, make sure that the power supply cord does not create a safety hazard. Keep it out of the way of traffic and moving parts. If the power supply cord or power conversion module is damaged, it must be replaced.
50 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service. CAUTION: The battery stored inside the equipment contains hazardous materials and must be disposed of according to Hazardous Waste Regulations. Refer to Hazardous Materials and Proper Disposal.
Chapter 5 Commercial Cardiovascular Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set forth below.
52 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Options / Accessories Many options or accessories have components that are connected internally or mounted inside the electronic console. The following guidelines determine the warranty for these components.
Commercial Cardiovascular Equipment Limited Warranty 53 This Limited Warranty shall not apply to: 1. Software version upgrades. 2. Software defects that do not materially and negatively affect the normal performance of the product under normal conditions of use. 3.
54 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes Precor Incorporated 20031 142nd Avenue NE P.O.
