Operation Manual

Treadmill 211 Assembly Guide 10
Completing the Assembly
The bottle holders attach to brackets on either side of the display console.
To attach the right and left bottle holders:
1. Slide the two bottle holders onto their brackets and secure each using an
M5 x 10 mm buttonhead screw and 5.2 mm washer. Fully tighten each screw.
Figure 13: Bottle attachments
2. Place the magnetic stop key into the cutout on the display.
Figure 14: Stop key attachment
Removing the Protective Film
The treadmill ships with a protective film over the Precor logos and on the
face of the console. To remove the film, grasp the edge of it and peel it off
the equipment.