Manualshelf

Installation Guide

ManualsBrandsPrecyse Technologies ManualsElectronicsPBS Base Station
12345678910
PBS installation guide
Copyright © 2007 Precyse Technologies Inc. All rights reserved
Theory of operation
The PBS base station is responsible for synchronizing all the other parts of the system
and transmitting data to and from the PC connected to it.
The GPS receiver in the PBS is used as an absolute timing and clock source.
Amplifier block: The amplifier box is connected to the PBS via a proprietary control
protocol.
Two of the four RF connectors are used as transmit and receive channels to the
amplifier. The other two SMA connectors are disabled (Internally, physically
disconnected).
The fifth RF port is a GPS antenna port.
Base Station unit (PBS) installation
Verify PBS contents
Each PBS unit consists of the following components: